0.2W Broadband Thermal Sensor, 1 - 200 mJ, 10-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller

PM02-12D-BB

The Opto Sigma PM02-12D-BB is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 0.2W with 10uW resolution. The PM02-12D-BB has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
◦Complete meter less model is very small and performs measurement and analysis with PC.
◦Display connecting model can be used with a lightweight touch screen display in a narrow environment where a PC cannot be installed.
More Information
Name 0.2W Broadband Thermal Sensor, 1 - 200 mJ, 10-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
Weight 0.2000kgs
Guide -
Attention -
Energy Range 1 mJ - 200 mJ
Power Range 0.1 mW - 200 mW
Wavelength Range 0.19 - 25µm
Aperture 10mm
Cooling Convection
Max Intermittent Power 200mW
Power Resolution 10uW
Noise Equivalent Power (NEP) 5uW
Response Time (0-90%) 2s
Power Calibration Uncertainty +/-3%
Power Linearity +/-1%
Energy Resolution 10uJ
Energy Calibration Uncertainty +/-5%
Type of Absorber HPB
Maximum Power Density 200W/cm2
Max Energy Density 5ms pulse width: 3.6 J/cm2, 10us pulse width: 0.2 J/cm2, 10ns pulse width: 0.1 J/cm2
Interface DB15 Conector, Compatible with PEM-TS-4.3 Controller
In stock
SKU
PM02-12D-BB
$766.00

Delivery in : in stock

The Opto Sigma PM02-12D-BB is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 0.2W with 10uW resolution. The PM02-12D-BB has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.

Resources & Downloads