Vacuum Compatible Stages & Actuators

Vacuum Compatible Stages & Actuators
  • Vacuum Compatible Motorized Linear Stages (1 and 2 axis)

    Description


  • Vacuum Compatible Linear Stages

    Description

    TSDS stages are made for use in 1E-6 Torr vacuum or cleanroom environments and feature Opto Sigma's EXC™ precision bearing ways. These bearing ways are not separate parts, as with competing stages, but processed directly into the body and base of the stage resulting in the highest stiffness, straightness, and smoothness of any stage on the market. They remain unmatched in overall performance to this day. TSDS stages are made completely from hardened 440C stainless steel for excellent cleanliness and corrosion resistance. Both the stage and the stainless steel micrometer head (included) have vented attachment holes and are lubricated with high-grade vacuum grease (YVAC2).

  • Vacuum Compatible Stainless steel 1&2-Axis Goniometers

    Description


  • Vacuum Compatible Manual Rotation Stages

    Description

    Our vacuum-compatible stainless steel rotation stages are made for use in 1E-6 Torr vacuum or clean room environments and are available in 40- and 60mm diameter platform sizes. They are driven by a special vacuum compatible micrometer which yields angular position readable to less than 2 arc minutes using the Vernier scale.  Like all micrometer driven rotation stages, they are designed to provide full 360-degree coarse as well as short-range fine angular travel over a single rotational degree of freedom, most commonly yaw.  The axis of rotation is orthogonal to the mounting platform.  OptoSigma vacuum compatible rotation stages have vented attachment holes and are lubricated with a high-grade vacuum grease (YVAC2).  If one of our many catalog stages does not meet your requirements, just send us a request for a custom version.  OptoSigma is, after all, the industry leader in translation stages.

  • Vacuum Motorized Actuators

    Description


  • Vacuum Compatible Micrometer Heads

    Description

    OptoSigma’s vacuum compatible micrometer heads are manufactured in-house and are used in some of the most demanding vacuum compatible applications. These are all stainless steel with etched graduations vs. markings with paint. They also incorporate low outgassing vacuum compatible grease and are rated for use up to 10^-6 Torr.

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.