Drivers
-
250 microsteps/full step
-
High current output 0.5-1.6A/phase
-
Auto current down to reduce motor heat generation
-
Low cost
Compact Micro-driver
The SG-55M compact micro-driver is an inexpensive single axis driver when used with your controller can drive the SGSP Series motorized stages. The SG-55M uses micro stepping to provide fine mechanical resolution. With high power output, the SG-55M can drive long travel, high load capacity stages up to the SGSP 65 Series stages. Auto current down function reduces the amount of heat generated during idle. The SG-5M and SG-5MA are lower cost drivers for applications where very fine micro stepping is not required.
Single axis micro-driver
The SG-5151 micro-driver is an economical single axis driver when used with your controller can drive the SGSP Series motorized stages. The SG-5151 has a built in 110V power supply. The UL certified driver offers high reliability in a compact, light-weight low
The SG-55M and SG-5151 offers the user the flexibility in configuring systems to meet a variety of applications. If you would like help in selecting the most appropriate products for your application please call. Our experienced Applications Engineers are ready to assist you.
SFS Piezo Actuator Controllers
The SFS Fine controller is available in one and three-axis versions and in UL and CE products. It is designed to work with the family of Piezo products. The controller will provide high performance in a wide range of applications including many measurement and inspection applications. The controller will operate both open and closed-loop stages. The closed-loop control system delivers resolution to within 2nm. The controller will provide accurate linearity to less than 0.2%.
SFS Fine offers both automatic controls using a personal computer and manual operation using a control pad. The control pad is required for manual operation, memory settings, and programming the system. When the SFS Fine is connected to a personal computer using the RS232C, GP-IB or USB interface, the stage can be accurately moved to the desired position by simple commands sent from the PC.
SGSP Stepper Motor Controllers
-
High performance, multi-function and programmable
-
Resolution to 0.25 microns
-
Control one to four axis
-
GP-IB, RS-232 and USB PC interfaces provide computer control and data acquisition
-
Labview and ActiveX software drivers
OptoSigma offers a complete line of controllers to configure with SGSP series motorized stages to meet your demanding applications. Controllers are available to control one to four axes and can be linked together to operate additional axes. These controllers are designed to provide precision positioning both by manual operation and by using a personal computer. Control system is easily programmed using ActiveX and Labview and is compatible with Windows HyperTerminal.
The SHOT 204-MS is a closed-loop control system. When used with the SGSP magnescale stages, resolution to 1 micron is achieved. Many of the features make this controller an approprate control system for measurement and inspection applications. If you would like help in selecting the most appropriate products for your application please call. Our experienced Applications Engineers are ready to assist you with your most demanding requirements.