Aluminum Crossed Roller Guide Motorized Stage 2 Axis (XY)

TAMM-XY

Aluminum Crossed Roller Guide Motorized Stage 2 Axis (XY)
In stock
SKU
TAMM-XY
Motorized crossed roller stages that combine compactness, low-profile and high durability.
custom product
Customize product
Filters
Enabled filters :
Remove all filters
Name Travel Load Capacity Delivery Price Add to cart
i
Motorized Aluminum Two Axis Linear Stage Travel 15mm
TAMM60-15C(XY)
15mm 39.2N (4.0kg)
2-3 weeks
$2,917.00
Travel 15mm
Stage Size 60×60mm
Feed Screw Ball screw diameter φ6mm、1mm lead
Positioning Slide Crossed roller
Stage Material Aluminium
Finish Black anodized
Resolution (Full) 2μm/pulse
Resolution (Half) 1μm/pulse
MAX Speed 10mm/sec
Load Capacity 39.2N(4.0kgf)
Backlash 1μm
Orthogonality of Motion 5μm
Sensor Part Number Micro photo sensor : GP1S097HCZ(Sharp Corporation)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor Equipped (NORMAL OPEN)
Proximity Origin Sensor None
i
Motorized Aluminum Two Axis Linear Stage Travel 50mm
TAMM100-50C(XY)
50mm 78.4N (8.0kg)
6-12 weeks
$4,039.00
Travel 50mm
Stage Size 100×100mm
Feed Screw Ball screw diameter φ8mm、1mm lead
Positioning Slide Crossed roller
Stage Material Aluminium
Finish Black anodized
Resolution (Full) 2μm/pulse
Resolution (Half) 1μm/pulse
MAX Speed 10mm/sec
Load Capacity 78.4N(8.0kgf)
Backlash 1μm
Orthogonality of Motion 5μm
Sensor Part Number Micro photo sensor : GP1S097HCZ(Sharp Corporation)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor Equipped (NORMAL OPEN)
Proximity Origin Sensor None
i
Motorized Aluminum Two Axis Linear Stage Travel 10mm
TAMM40-10C(XY)
10mm 24.5N (2.5kg)
6-12 weeks
$2,693.00
Travel 10mm
Stage Size 40×40mm
Feed Screw Ball screw diameter φ4mm、1mm lead
Positioning Slide Crossed roller
Stage Material Aluminium
Finish Black anodized
Resolution (Full) 2μm/pulse
Resolution (Half) 1μm/pulse
MAX Speed 10mm/sec
Load Capacity 24.5N(2.5kgf)
Backlash 1μm
Orthogonality of Motion 5μm
Sensor Part Number Micro photo sensor : GP1S097HCZ(Sharp Corporation)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor Equipped (NORMAL OPEN)
Proximity Origin Sensor None
i
Motorized Aluminum Two Axis Linear Stage Travel 100mm
TAMM100-100C(XY)
100mm 68.6N (7.0kg)
2-3 weeks
$4,712.00
Travel 50mm
Stage Size 100×175mm
Feed Screw Ball screw diameter φ8mm、1mm lead
Positioning Slide Crossed roller
Stage Material Aluminium
Finish Black anodized
Resolution (Full) 2μm/pulse
Resolution (Half) 1μm/pulse
MAX Speed 10mm/sec
Load Capacity 68.6N(7.0kgf)
Backlash 1μm
Orthogonality of Motion 5μm
Sensor Part Number Micro photo sensor : GP1S097HCZ(Sharp Corporation)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor Equipped (NORMAL OPEN)
Proximity Origin Sensor None

You must be logged in to ask questions

These linear stages utilize
◦anti-creep crossed roller bearings
◦a special nut-shape ball screw.
◦black anodized aluminum body.

 

Selection Guide for Stepper Motor Controllers

Groups

Description

Control Axis Options

Computer Interface Options

Micro Stepping

Min. / Max. Driving Speed

Additional Features

Relative Price

Standard Stepper Controllers

The GSC series controllers are our most cost-effective stepper controller and provide basic control for the 5-phase stepper motor actuators and stages. Half stepping is supported.

 

1 axis

2 axes

RS232C

Up to 2 steps

100 Pulses/Sec

20,000 Pulses/Sec

 

Limit switch detection, Requires AC-ADP-2427 power supply

$

Micro Stepping Controller

The SHOT-702 series controller includes a micro-step driver to enable ultra-fine resolution for the stepper motor stages and actuators.

2 axes

 

RS232C, USB

Up to 250 steps

1 Pulse/Sec

500,000 Pulses/Sec

 

Limit switch detection, E-Break for Motor

$$$

Low Noise Controller

The HSC 3-axis controller is designed to provide low noise and high current capacity for driving larger stepper motor stages.  The driving speed is 8X higher than the other controllers

3 axes

 

USB

40 steps, fixed

1 Pulse/Sec

4,000,000 Pulses/Sec

 

Low noise and vibration driver design, High driving current capacity, 3-axis Linear Interpolation, Circular Interpolation

$$$$$$

Closed-Loop Controller

The SHOT-GS controllers provide full closed-loop functionality for 2- or 4- axis stage systems. 

2 axes

4 axes

 

GPIB, RS232C, USB

Up to 250 steps

1 Pulse/Sec

500,000 Pulses/Sec

 

Closed-loop Control, Control programs can be stored in internal memory, Linear Interpolation (2 axes), Circular Interpolation, Requires CJ-200A control pad

$$$$$$$

Closed Loop, Extendable Controller

The HIT controllers can be daisy-chained together to control 8 stages. They run in a master/slave configuration and provide full closed-loop functionality

Extendable

2 to 8 axes

 

RS232C, USB, Ethernet

Up to 250 steps

1 Pulse/Sec

500,000 Pulses/Sec

 

Can be daisy-chained to control up to 8 axes, Closed-loop control function, Requires the AC-ADP-2427 power supply for each unit.

2-Axes: $$$

Additional Axes ea:  $

Click here to receive announcements and exclusive promotions

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.