200W Broadband Thermal Sensor, 200 mJ - 200 J, 25-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller

PM200-25D-HP

The Opto Sigma PM200-25D-HP is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 200W with 10mW resolution. The PM200-25D-HP has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
-
More Information
Name 200W Broadband Thermal Sensor, 200 mJ - 200 J, 25-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
Weight 0.9000kgs
Guide -
Attention -
Energy Range 200 mJ - 200 J
Power Range 150 mW - 200W
Wavelength Range 0.19 - 11µm
Aperture 25mm
Cooling Forced Air with Fan
Max Intermitent Power 250W
Power Resolution 10mW
Noise Equivalent Power (NEP) 10mW
Response Time (0-90%) 1.7s
Power Calibration Uncertainty +/-3%
Power Linearity +/-1%
Energy Resolution 10mJ
Energy Calibration Uncertainty +/-5%
Type of Absorber HPB
Maximum Power Density 4kW/cm2
Max Energy Density 5ms pulse width: 36 J/cm2, 10us pulse width: 1.2 J/cm2, 10ns pulse width: 0.3 J/cm2
Interface DB15 Conector, Compatible with PEM-TS-4.3 Controller
In stock
SKU
PM200-25D-HP
$1,139.00

Delivery in : 2-3 weeks

The Opto Sigma PM200-25D-HP is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 200W with 10mW resolution. The PM200-25D-HP has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.

Resources & Downloads