Laser introduction direction can be adjusted in any direction of 360º. Please check the product instruction manual about the adjustment method. *Not included adjustment tool (Hex wrench).
The tilt adjustment of the internal mirror can be available. Please check the product instruction manual about the adjustment method. *Not included adjustment tools (Hex wrench and screwdriver).
Mounting standard of the objective lens is M26 P=0.706, but for mounting the conversion adapter attached to the observation unit with coaxial illumination conversion adapter, M20.32 P=0.706 can be available.
A wide variety of objective lenses is available. Long working distance objective lenses (WEB Reference Catalog Code/W3086), Glass Thickness Compensation Ultra-violet Objective Lenses (WEB Reference Catalog Code/W3463), Thickness Compensation Near Ultra-violet Objective Lenses (WEB Reference Catalog Code/W3464), and Thickness Compensation Near Infrared Objective Lenses (WEB Reference Catalog Code/W3465).
Attention
There is an adjustment mechanism in the internal mirror, but it is for only fine adjustment.
Incident of the laser beam is requested vertically as much as possible.
There is a possibility that the image of the coaxial observation in the laser introduction is not clear.
Image Label
Dichroic Case for Laser Introduction at 355nm
Wavelength Range
355nm
Input aperture
φ10mm
Reflectance
>99.5%(355nm)
Laser Damage Threshold
5J/㎝
Mounting screw thread for Observation unit
M26 P=0.706
Mounting screw for Objective lens
M26 P=0.706
In stock
SKU
DIMC-355R
$436.80
Allows the induction of a laser beam into the optical path of the OUCI microscope body products.