Cage Two Axis Holder with Tilt

C30-ALH5-25.4

Tilt adjustment is added to Cage cross movement holder. It can be used as a device holder to adjust the positioning of the optics requires centering.
◦C30-ALH can be placed in the center of the cage since holes for rods passes through the holder.
◦The tilt mechanism has a three-axis adjustment knob for fine adjustment of the optics in the optical axis direction.
◦The cross movement mechanism is equipped with a clamp to fix the center position of the optics after adjustment. It can be assembled with the base with M4 rods.
More Information
Name Cage Two Axis Holder with Tilt
Weight 0.2000kgs
Guide ◦C30-ALH can be placed in the center of the cage since holes for rods passes through the holder.
◦The tilt mechanism has a three-axis adjustment knob for fine adjustment of the optics in the optical axis direction.
◦The cross movement mechanism is equipped with a clamp to fix the center position of the optics after adjustment. It can be assembled with the base with M4 rods.
Attention ▶The adjustment mechanism is not equipped with a clamp to fix the adjustment status.
Primary material Aluminum
Guide Rod Diameter (Spaceing between rod) φ6mm (30x30mm)
Compatible Optics Diameter φ25.4mm
Compatible Optics Thickness - 9mm
Clear Aperture φ22mm
Adjustment range /Cross-movement φ2mm
Resolution / Cross-movement 0.25mm/rotation
Adjustment Range /Tilt ±3°
Adjustment Range /Rotation ±3°
Resolution /Tilt 0.32°/rotation
Resolution /Rotation 0.32°/rotation
Installation Slide from the end of rods
In stock
SKU
C30-ALH5-25.4
$296.00

Delivery in : 2 weeks

Tilt adjustment is added to Cage cross movement holder. It can be used as a device holder to adjust the positioning of the optics requires centering.

Click here to receive announcements and exclusive promotions

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.