X-Axis Linear Translation Stages with Built-in Controller

SBIS-X

X-Axis Linear Translation Stages with Built-in Controller
In stock
SKU
SBIS-X
No extra controller or driver is needed to operate these stages. That's because it is built into the stage itself, saving on space and wiring. Up to 99 SBIS stages can be connected together (Daisy Chained) and operated from a single computer. These stepping motor driven stages are ideal for positioning of measuring instrument or inspection tools for which high stiffness and high precision are required.
custom product
Customize product
Filters
Enabled filters :
Remove all filters

Guide For the cable that connects SBIS stages together, please purchase separately HR10HR10P-RC-1 (with power cable) or HR10HR10-RC-1 (without power cable). Please purchase D9HR10-RC-2 separately for the cable that connects the host PC and SBIS. The interface is RS232C. For the power supply, please purchase the recommended AC adapter AC-ADP-2433 separately. Power can be supplied for up to 3 axes. After the 4th axis, an additional AC adapter is required for every 3 axes. A manual knob allows stage adjustment when the power is off. The following sample programs can be downloaded SG Sample or LabVIEW for 32/64-bit Windows

Name Travel Load Capacity Mounting Thread Delivery Price Add to cart
i
200mm Travel, X-Axis Stage, Built-In Controller, 120X120mm Platform, 1/4-20 Thread
SBIS26-200X-INCH
200mm 117N (12.0kg) 1/4-20UNC
6-12 weeks
$2,580.00
Stage Size 120x120mm
Feed Screw Ball screw diameter 8mmx2mm lead
Positioning Slide Outer rail structure
Stage Material Aluminium
Finish Black anodized
Resolution 50nm/pulse at 80 divisions/step
Minimum/Maximum Driving speed 1pps/800,000pps
MAX Speed 40mm/sec
Positioning Accuracy 5um
Positional Repeatability 3um
Moment Stiffness / Pitch 0.23arcmin./N-cm
Moment Stiffness / Yaw 0.12arcmin./N-cm
Moment Stiffness / Roll 0.2arcmin./N-cm
Lost Motion 3um
Backlash 3um
Parallelism 50um
Running Parallelism 10um
Pitch 25arcsec
Yaw 20arcsec
Sensor Part Number Micro photo sensor : GP1S092HCPIF(Sharp Corporation)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor Equipped (NORMAL OPEN)
Proximity Origin Sensor None
Drive Currernt 0.75A/Phase
Motor Type 5-phase stepping motor
Microstep Range (maximum number of divisions) 1 to 250 divisions
Motor Step Angle 0.72 Deg.
Maximum number of control axes 99 axes
Manual drive knob Provided
Operating Temperature Range 5 to 40Deg. C
i
100mm Travel, X-Axis Stage, Built-In Controller, 120X120mm Platform, M6 Thread
SBIS26-100X-M6
100mm 117N (12.0kg) M6
6-12 weeks
$2,380.00
Stage Size 120x120mm
Feed Screw Ball screw diameter 8mmx2mm lead
Positioning Slide Outer rail structure
Stage Material Aluminium
Finish Black anodized
Resolution 50nm/pulse at 80 divisions/step
Minimum/Maximum Driving speed 1pps/800,000pps
MAX Speed 40mm/sec
Positioning Accuracy 5um
Positional Repeatability 3um
Moment Stiffness / Pitch 0.23arcmin./N-cm
Moment Stiffness / Yaw 0.12arcmin./N-cm
Moment Stiffness / Roll 0.2arcmin./N-cm
Lost Motion 3um
Backlash 3um
Parallelism 50um
Running Parallelism 10um
Pitch 25arcsec
Yaw 20arcsec
Sensor Part Number Micro photo sensor : GP1S092HCPIF(Sharp Corporation)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor Equipped (NORMAL OPEN)
Proximity Origin Sensor None
Drive Currernt 0.75A/Phase
Motor Type 5-phase stepping motor
Microstep Range (maximum number of divisions) 1 to 250 divisions
Motor Step Angle 0.72 Deg.
Maximum number of control axes 99 axes
Manual drive knob Provided
Operating Temperature Range 5 to 40Deg. C
i
35mm Travel, X-Axis Stage, Built-In Controller, 120X120mm Platform, 1/4-20 Thread
SBIS26-35X-INCH
35mm 117N (12.0kg) 1/4-20UNC
6-12 weeks
$2,080.00
Stage Size 120x120mm
Feed Screw Ball screw diameter 8mmx2mm lead
Positioning Slide Outer rail structure
Stage Material Aluminium
Finish Black anodized
Resolution 50nm/pulse at 80 divisions/step
Minimum/Maximum Driving speed 1pps/800,000pps
MAX Speed 40mm/sec
Positioning Accuracy 5um
Positional Repeatability 3um
Moment Stiffness / Pitch 0.23arcmin./N-cm
Moment Stiffness / Yaw 0.12arcmin./N-cm
Moment Stiffness / Roll 0.2arcmin./N-cm
Lost Motion 3um
Backlash 3um
Parallelism 50um
Running Parallelism 10um
Pitch 25arcsec
Yaw 20arcsec
Sensor Part Number Micro photo sensor : GP1S092HCPIF(Sharp Corporation)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor Equipped (NORMAL OPEN)
Proximity Origin Sensor None
Drive Currernt 0.75A/Phase
Motor Type 5-phase stepping motor
Microstep Range (maximum number of divisions) 1 to 250 divisions
Motor Step Angle 0.72 Deg.
Maximum number of control axes 99 axes
Manual drive knob Provided
Operating Temperature Range 5 to 40Deg. C
i
300mm Travel, X-Axis Stage, Built-In Controller, 120X120mm Platform, M6 Thread
SBIS26-300X-M6
300mm 117N (12.0kg) M6
2 weeks
$2,780.00
Stage Size 120x120mm
Feed Screw Ball screw diameter 8mmx2mm lead
Positioning Slide Outer rail structure
Stage Material Aluminium
Finish Black anodized
Resolution 50nm/pulse at 80 divisions/step
Minimum/Maximum Driving speed 1pps/800,000pps
MAX Speed 40mm/sec
Positioning Accuracy 5um
Positional Repeatability 3um
Moment Stiffness / Pitch 0.23arcmin./N-cm
Moment Stiffness / Yaw 0.12arcmin./N-cm
Moment Stiffness / Roll 0.2arcmin./N-cm
Lost Motion 3um
Backlash 3um
Parallelism 50um
Running Parallelism 10um
Pitch 25arcsec
Yaw 20arcsec
Sensor Part Number Micro photo sensor : GP1S092HCPIF(Sharp Corporation)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor Equipped (NORMAL OPEN)
Proximity Origin Sensor None
Drive Currernt 0.75A/Phase
Motor Type 5-phase stepping motor
Microstep Range (maximum number of divisions) 1 to 250 divisions
Motor Step Angle 0.72 Deg.
Maximum number of control axes 99 axes
Manual drive knob Provided
Operating Temperature Range 5 to 40Deg. C
i
100mm Travel, X-Axis Stage, Built-In Controller, 120X120mm Platform, 1/4-20 Thread
SBIS26-100X-INCH
100mm 117N (12.0kg) 1/4-20UNC
2 weeks
$2,380.00
Stage Size 120x120mm
Feed Screw Ball screw diameter 8mmx2mm lead
Positioning Slide Outer rail structure
Stage Material Aluminium
Finish Black anodized
Resolution 50nm/pulse at 80 divisions/step
Minimum/Maximum Driving speed 1pps/800,000pps
MAX Speed 40mm/sec
Positioning Accuracy 5um
Positional Repeatability 3um
Moment Stiffness / Pitch 0.23arcmin./N-cm
Moment Stiffness / Yaw 0.12arcmin./N-cm
Moment Stiffness / Roll 0.2arcmin./N-cm
Lost Motion 3um
Backlash 3um
Parallelism 50um
Running Parallelism 10um
Pitch 25arcsec
Yaw 20arcsec
Sensor Part Number Micro photo sensor : GP1S092HCPIF(Sharp Corporation)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor Equipped (NORMAL OPEN)
Proximity Origin Sensor None
Drive Currernt 0.75A/Phase
Motor Type 5-phase stepping motor
Microstep Range (maximum number of divisions) 1 to 250 divisions
Motor Step Angle 0.72 Deg.
Maximum number of control axes 99 axes
Manual drive knob Provided
Operating Temperature Range 5 to 40Deg. C
i
50mm Travel, X-Axis Stage, Built-In Controller, 120X120mm Platform, M6 Thread
SBIS26-50X-M6
50mm 117N (12.0kg) M6
6-12 weeks
$2,280.00
Stage Size 120x120mm
Feed Screw Ball screw diameter 8mmx2mm lead
Positioning Slide Outer rail structure
Stage Material Aluminium
Finish Black anodized
Resolution 50nm/pulse at 80 divisions/step
Minimum/Maximum Driving speed 1pps/800,000pps
MAX Speed 40mm/sec
Positioning Accuracy 5um
Positional Repeatability 3um
Moment Stiffness / Pitch 0.23arcmin./N-cm
Moment Stiffness / Yaw 0.12arcmin./N-cm
Moment Stiffness / Roll 0.2arcmin./N-cm
Lost Motion 3um
Backlash 3um
Parallelism 50um
Running Parallelism 10um
Pitch 25arcsec
Yaw 20arcsec
Sensor Part Number Micro photo sensor : GP1S092HCPIF(Sharp Corporation)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor Equipped (NORMAL OPEN)
Proximity Origin Sensor None
Drive Currernt 0.75A/Phase
Motor Type 5-phase stepping motor
Microstep Range (maximum number of divisions) 1 to 250 divisions
Motor Step Angle 0.72 Deg.
Maximum number of control axes 99 axes
Manual drive knob Provided
Operating Temperature Range 5 to 40Deg. C
i
300mm Travel, X-Axis Stage, Built-In Controller, 120X120mm Platform, 1/4-20 Thread
SBIS26-300X-INCH
300mm 117N (12.0kg) 1/4-20UNC
6-12 weeks
$2,780.00
Stage Size 120x120mm
Feed Screw Ball screw diameter 8mmx2mm lead
Positioning Slide Outer rail structure
Stage Material Aluminium
Finish Black anodized
Resolution 50nm/pulse at 80 divisions/step
Minimum/Maximum Driving speed 1pps/800,000pps
MAX Speed 40mm/sec
Positioning Accuracy 5um
Positional Repeatability 3um
Moment Stiffness / Pitch 0.23arcmin./N-cm
Moment Stiffness / Yaw 0.12arcmin./N-cm
Moment Stiffness / Roll 0.2arcmin./N-cm
Lost Motion 3um
Backlash 3um
Parallelism 50um
Running Parallelism 10um
Pitch 25arcsec
Yaw 20arcsec
Sensor Part Number Micro photo sensor : GP1S092HCPIF(Sharp Corporation)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor Equipped (NORMAL OPEN)
Proximity Origin Sensor None
Drive Currernt 0.75A/Phase
Motor Type 5-phase stepping motor
Microstep Range (maximum number of divisions) 1 to 250 divisions
Motor Step Angle 0.72 Deg.
Maximum number of control axes 99 axes
Manual drive knob Provided
Operating Temperature Range 5 to 40Deg. C
i
200mm Travel, X-Axis Stage, Built-In Controller, 120X120mm Platform, M6 Thread
SBIS26-200X-M6
200mm 117N (12.0kg) M6
2 weeks
$2,580.00
Stage Size 120x120mm
Feed Screw Ball screw diameter 8mmx2mm lead
Positioning Slide Outer rail structure
Stage Material Aluminium
Finish Black anodized
Resolution 50nm/pulse at 80 divisions/step
Minimum/Maximum Driving speed 1pps/800,000pps
MAX Speed 40mm/sec
Positioning Accuracy 5um
Positional Repeatability 3um
Moment Stiffness / Pitch 0.23arcmin./N-cm
Moment Stiffness / Yaw 0.12arcmin./N-cm
Moment Stiffness / Roll 0.2arcmin./N-cm
Lost Motion 3um
Backlash 3um
Parallelism 50um
Running Parallelism 10um
Pitch 25arcsec
Yaw 20arcsec
Sensor Part Number Micro photo sensor : GP1S092HCPIF(Sharp Corporation)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor Equipped (NORMAL OPEN)
Proximity Origin Sensor None
Drive Currernt 0.75A/Phase
Motor Type 5-phase stepping motor
Microstep Range (maximum number of divisions) 1 to 250 divisions
Motor Step Angle 0.72 Deg.
Maximum number of control axes 99 axes
Manual drive knob Provided
Operating Temperature Range 5 to 40Deg. C
i
50mm Travel, X-Axis Stage, Built-In Controller, 120X120mm Platform, 1/4-20 Thread
SBIS26-50X-INCH
50mm 117N (12.0kg) 1/4-20UNC
6-12 weeks
$2,280.00
Stage Size 120x120mm
Feed Screw Ball screw diameter 8mmx2mm lead
Positioning Slide Outer rail structure
Stage Material Aluminium
Finish Black anodized
Resolution 50nm/pulse at 80 divisions/step
Minimum/Maximum Driving speed 1pps/800,000pps
MAX Speed 40mm/sec
Positioning Accuracy 5um
Positional Repeatability 3um
Moment Stiffness / Pitch 0.23arcmin./N-cm
Moment Stiffness / Yaw 0.12arcmin./N-cm
Moment Stiffness / Roll 0.2arcmin./N-cm
Lost Motion 3um
Backlash 3um
Parallelism 50um
Running Parallelism 10um
Pitch 25arcsec
Yaw 20arcsec
Sensor Part Number Micro photo sensor : GP1S092HCPIF(Sharp Corporation)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor Equipped (NORMAL OPEN)
Proximity Origin Sensor None
Drive Currernt 0.75A/Phase
Motor Type 5-phase stepping motor
Microstep Range (maximum number of divisions) 1 to 250 divisions
Motor Step Angle 0.72 Deg.
Maximum number of control axes 99 axes
Manual drive knob Provided
Operating Temperature Range 5 to 40Deg. C
i
35mm Travel, X-Axis Stage, Built-In Controller, 120X120mm Platform, M6 Thread
SBIS26-35X-M6
35mm 117N (12.0kg) M6
6-12 weeks
$2,080.00
Stage Size 120x120mm
Feed Screw Ball screw diameter 8mmx2mm lead
Positioning Slide Outer rail structure
Stage Material Aluminium
Finish Black anodized
Resolution 50nm/pulse at 80 divisions/step
Minimum/Maximum Driving speed 1pps/800,000pps
MAX Speed 40mm/sec
Positioning Accuracy 5um
Positional Repeatability 3um
Moment Stiffness / Pitch 0.23arcmin./N-cm
Moment Stiffness / Yaw 0.12arcmin./N-cm
Moment Stiffness / Roll 0.2arcmin./N-cm
Lost Motion 3um
Backlash 3um
Parallelism 50um
Running Parallelism 10um
Pitch 25arcsec
Yaw 20arcsec
Sensor Part Number Micro photo sensor : GP1S092HCPIF(Sharp Corporation)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor Equipped (NORMAL OPEN)
Proximity Origin Sensor None
Drive Currernt 0.75A/Phase
Motor Type 5-phase stepping motor
Microstep Range (maximum number of divisions) 1 to 250 divisions
Motor Step Angle 0.72 Deg.
Maximum number of control axes 99 axes
Manual drive knob Provided
Operating Temperature Range 5 to 40Deg. C

You must be logged in to ask questions

This motorized stage has a built-in 5-phase stepping motor driver and controller, saving on wiring and space, and can be controlled with simple commands. A maximum of 99 SBIS stages can be controlled by Daisy-Chain connection using our dedicated cables .

Click here to receive announcements and exclusive promotions

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.