High-Stability Mirror Mounts

MHX

High-Stability Mirror Mounts
In stock
SKU
MHX

Starting at $122.00

MHX-series mounts are all-stainless steel holders made for standard 12.7-mm (0.5-in.), 25.4-mm (1-in.), and 50.8-mm (2-in.) mirrors. They feature a hollow-frame design that not only provides a higher moment of inertia to maximize stiffness but also thinner, reduced-mass sections allowing it to reach thermal equilibrium faster than traditionally designed mounts. Thermal repeatability tests validate the effectiveness of the new frame design, showing lower deflection and equivalent repeatability against rival mounts. The MHX mount is loaded with additional features like center-post mounting, adhesive wells, and keying pin slots, all in the industry’s most compact and affordable stainless steel mount.
custom product
Customize product
Filters
Enabled filters :
Remove all filters
Name Optic Loading Side Angle Range Material Number of Control Axes Optic Diameter Delivery Price Add to cart
i
25.4-mm mirror mount, stainless steel, high-stability, front-loading, 3 hex adjusters
MHX-25.4F
Front Loading ±3° Stainless Steel 3 Axes φ25.4mm
in stock
$127.00
Mount Material Stainless Steel
Compatible Optics Diameter φ25, φ25.4mm
Compatible Optics Thickness 3 - 6mm
Mirror Loading Front
Mirror Clamping Mechanism Set Screw with Torsion Barrier, 2-mm (5/64-in.) Hex Key
Number of Adjustment Axes 3 points
Angular Travel Range ±3°
Linear Travel Range ±3.5mm
Adjuster Thread M6 x 0.250mm
Standardized Adjustment Sensitivity (based on 1° knob rotation) 20 μrad
Typical Adjustment Sensitivity 6±2 μrad
Dowel Pin Keys ɸ2mm Slot and Hole
Standard Mounting Counterbored clearance hole for M4 / 8-32 screws
Center-Post Mounting M4 and 8-32 threaded holes
Thermal Repeatability with a Δ10°C Thermal Cycle ≤1.5 μrad
i
12.7-mm mirror mount, stainless steel, high-stability, front-loading, 3 hex adjusters
MHX-12.7F
Front Loading ±3° Stainless Steel 3 Axes φ12.7mm
6-12 weeks
$126.00
Products Name High-stability mirror mount
Compatible Optics Diameter φ12.7mm
Compatible Optics Thickness 2 - 6mm
Clear Aperture φ11.5mm
Number of Adjustment Axes 3 point
Mounting direction Front
Adjustment Range /Tilt ±3°
Adjustment Range /Rotation ±3°
Resolution /Tilt About 0.8°/rotation
Resolution /Rotation About 0.8°/rotation
Compatible Holders -
Quantity 1
i
50.8-mm mirror mount, stainless steel, high-stability, front-loading, 3 hex adjusters
MHX-50.8F
Front Loading ±3° Stainless Steel 3 Axes φ50.8mm
in stock
$234.00
Mount Material Stainless Steel
Compatible Optics Diameter 50.8mm
Compatible Optics Thickness 5 - 13mm
Mirror Loading Front
Mirror Clamping Mechanism Set Screw with Torsion Barrier, 2-mm (5/64-in.) Hex Key
Number of Adjustment Axes 3 points
Angular Travel Range ±3°
Linear Travel Range ±3.5mm
Adjuster Thread M6 x 0.250mm
Standardized Adjustment Sensitivity (based on 1° knob rotation) 13 μrad
Typical Adjustment Sensitivity 4±2 μrad
Dowel Pin Keys ɸ2mm Slot and Hole
Standard Mounting Counterbored clearance hole for M4 / 8-32 screws
Center-Post Mounting M4 and 8-32 threaded holes
Thermal Repeatability with a Δ10°C Thermal Cycle ≤1.5 μrad
i
25.4-mm mirror mount, stainless steel, high-stability, front-loading, 2 hex adjusters
MHX-25.4A
Front Loading ±3° Stainless Steel 2 Axes φ25.4mm
in stock
$123.00
Mount Material Stainless Steel
Compatible Optics Diameter φ25, φ25.4mm
Compatible Optics Thickness 3 - 6mm
Mirror Loading Front
Mirror Clamping Mechanism Set Screw with Torsion Barrier, 2-mm (5/64-in.) Hex Key
Number of Adjustment Axes 2 points
Angular Travel Range ±3°
Adjuster Thread M6 x 0.250mm
Standardized Adjustment Sensitivity (based on 1° knob rotation) 20 μrad
Typical Adjustment Sensitivity 6±2 μrad
Dowel Pin Keys ɸ2mm Slot and Hole
Standard Mounting Counterbored clearance hole for M4 / 8-32 screws
Center-Post Mounting M4 and 8-32 threaded holes
Thermal Repeatability with a Δ10°C Thermal Cycle ≤1.5 μrad
i
12.7-mm mirror mount, stainless steel, high-stability, rear-loading, 3 hex adjusters
MHX-12.7F-R
Rear Loading ±3° Stainless Steel 3 Axes φ12.7mm
in stock
$126.00
Products Name High-stability mirror mount
Compatible Optics Diameter φ12.7mm
Compatible Optics Thickness 2 - 6mm
Clear Aperture φ11.5mm
Number of Adjustment Axes 3 point
Mounting direction Back
Adjustment Range /Tilt ±3°
Adjustment Range /Rotation ±3°
Resolution /Tilt About 0.8°/rotation
Resolution /Rotation About 0.8°/rotation
Compatible Holders -
Quantity 1
i
25.4-mm mirror mount, stainless steel, high-stability, rear-loading, 3 hex adjusters
MHX-25.4F-R
Rear Loading ±3° Stainless Steel 3 Axes φ25.4mm
in stock
$134.00
Mount Material Stainless Steel
Compatible Optics Diameter φ25, φ25.4mm
Compatible Optics Thickness 3 - 6mm
Mirror Loading Rear
Mirror Clamping Mechanism Set Screw with Torsion Barrier, 2-mm (5/64-in.) Hex Key
Number of Adjustment Axes 3 points
Angular Travel Range ±3°
Linear Travel Range ±3.5mm
Adjuster Thread M6 x 0.250mm
Standardized Adjustment Sensitivity (based on 1° knob rotation) 20 μrad
Typical Adjustment Sensitivity 6±2 μrad
Dowel Pin Keys ɸ2mm Slot and Hole
Standard Mounting Counterbored clearance hole for M4 / 8-32 screws
Center-Post Mounting M4 and 8-32 threaded holes
Thermal Repeatability with a Δ10°C Thermal Cycle ≤1.5 μrad
i
12.7-mm mirror mount, stainless steel, high-stability, front-loading, 2 hex adjusters
MHX-12.7A
Front Loading ±3° Stainless Steel 2 Axes φ12.7mm
6-12 weeks
$122.00
Products Name 12.7-mm mirror mount, stainless steel, high-stability, front-loading, 2 hex adjusters
Compatible Optics Diameter φ12.7mm
Compatible Optics Thickness 2 - 6mm
Clear Aperture φ11.5mm
Number of Adjustment Axes 2 point
Mounting direction Front
Adjustment Range /Tilt ±3°
Adjustment Range /Rotation ±3°
Resolution /Tilt About 0.8°/rotation
Resolution /Rotation About 0.8°/rotation
Compatible Holders -
Quantity 1
i
50.8-mm mirror mount, stainless steel, high-stability, front-loading, 2 hex adjusters
MHX-50.8A
Front Loading ±3° Stainless Steel 2 Axes φ50.8mm
in stock
$212.00
Mount Material Stainless Steel
Compatible Optics Diameter 50.8mm
Compatible Optics Thickness 5 - 13mm
Mirror Loading Front
Mirror Clamping Mechanism Set Screw with Torsion Barrier, 2-mm (5/64-in.) Hex Key
Number of Adjustment Axes 2 points
Angular Travel Range ±3°
Linear Travel Range ±3.5mm
Adjuster Thread M6 x 0.250mm
Standardized Adjustment Sensitivity (based on 1° knob rotation) 13 μrad
Typical Adjustment Sensitivity 4±2 μrad
Dowel Pin Keys ɸ2mm Slot and Hole
Standard Mounting Counterbored clearance hole for M4 / 8-32 screws
Center-Post Mounting M4 and 8-32 threaded holes
Thermal Repeatability with a Δ10°C Thermal Cycle ≤1.5 μrad

You must be logged in to ask questions

Click here to receive announcements and exclusive promotions

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.