50.8-mm mirror mount, stainless steel, high-stability, front-loading, 2 hex adjusters

MHX-50.8A

Higher moment of inertia to maximize stiffness and faster to reach thermal equilibrium characteristics are achieved by a hollow-frame design. Ideal for interference measurement or precision measurement.
Please check for an introduction video of the structure and features of MHX.
◦The mirror can be inserted from the back of the holder and fixed so that the reflecting surface of the mirror stops at the butt of the mirror frame with MHX-25.4F-R. This ensures that the reflecting surface of the mirror is always aligned with the mounting center of the rod, even if the thickness of the mirror changes. (For MHX-***F/A, the mirror is inserted from the front of the holder; for MHX-12.7F-R, the mirror is inserted from the back, but the rod cannot be attached.
◦MHX-***F/F-R has three adjustment axes screws that allow the reflecting surface to be moved back and forth in addition to the adjustment of tilt and rotation. (MHX-***A has only 2 axes of adjustment screws, so it can only be used for adjustment of tilt and rotation.
◦Adhesive holes for mirror adhesion and pin holes for anti-rotation and positioning are equiped.
◦High-density stainless steel is used for the material, but the weight has been reduced by reducing the thickness.
◦The frame design provides a higher moment of inertia to maximize stiffness and reduced-mass sections allowing it to reach thermal equilibrium faster for maximum stability.



More Information
Name 50.8-mm mirror mount, stainless steel, high-stability, front-loading, 2 hex adjusters
Weight 0.3500kgs
Optic Loading Side Front Loading
Angle Range ±3°
Material Stainless Steel
Number of Control Axes 2 points
Optic Diameter φ50.8mm
Mount Material Stainless Steel
Compatible Optics Diameter 50.8mm
Compatible Optics Thickness 5 - 13mm
Mirror Loading Front
Mirror Clamping Mechanism Set Screw with Torsion Barrier, 2-mm (5/64-in.) Hex Key
Number of Adjustment Axes 2 points
Angular Travel Range ±3°
Linear Travel Range ±3.5mm
Adjuster Thread M6 x 0.250mm
Standardized Adjustment Sensitivity (based on 1° knob rotation) 13 μrad
Typical Adjustment Sensitivity 4±2 μrad
Dowel Pin Keys ɸ2mm Slot and Hole
Standard Mounting Counterbored clearance hole for M4 / 8-32 screws
Center-Post Mounting M4 and 8-32 threaded holes
Thermal Repeatability with a Δ10°C Thermal Cycle ≤1.5 μrad
In stock
SKU
MHX-50.8A
$192.78

Delivery in : in stock

Higher moment of inertia to maximize stiffness and faster to reach thermal equilibrium characteristics are achieved by a hollow-frame design. Ideal for interference measurement or precision measurement.
Please check for an introduction video of the structure and features of MHX.

Resources & Downloads

Click here to receive announcements and exclusive promotions

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.