Variable Plate Beamsplitter BK7 50x50mm 1064nm

VBS-50S03-1-1064

With a variable beamsplitter, the incident angle of a laser can be changed. The (R:T) ratios can also be modified. This is commonly used to adjust the light intensity of the laser without a variable adjustment of the light intensity or the laser to be stabilized.
◦The variable beamsplitter has a dielectric multilayer coating which has excellent durability and light resistance.
◦The beam shift caused by the tilt of the beamsplitter can be removed by using a correcting plate. (See how to use)
◦It can be used for arbitrary polarization. However, the transmittance characteristic depends on the polarization.
More Information
Name Variable Plate Beamsplitter BK7 50x50mm 1064nm
Weight 0.0170kgs
Standard Coatings Available No
Guide
  • Different size, wavelength and deviation not mentioned on-line or in our catalog are available as custom product upon on request.
  • WEB Reference Catalog Code/W3802
  • We offer the most comprehensive range of beamsplitter holders and stages to select from. Let us know the angle of your choice.
  • This variable attenuator (model SVAB) can be used in a system and is available.
Remark -
Attention
  • When using with high power laser, make sure to execute at the end edge of the reflected light.
  • The reflectance properties of the optics may change in a high temperature environment.
  • When adjusting the transmittance, the incident angle may change and cause the light path to shift. To correct this, please use the light path corrector (model WSQNA/WBNA)
  • For a large beam size of 30mm diameter or larger and used it at a high inclination level, the beam can be cut at the reflected area.
  • For “P” polarization use, make sure that the incident angle is at 45 degrees or more.
Design wavelength 1064nm
Image Label Variable Plate Beamsplitter BK7 50x50mm 1064nm
Laser Damage Threshold 3.5J/cm<sup>2</sup>
Material BK7
Material BK7
Surface flatness λ
Parallelism <5″
Coating Front surface ; Dielectric multilayer coating
Rear surfaces ; Multilayer antireflection coating
Surface Quality (Scratch-Dig) 10−5
Clear aperture Circle that inscribed in a square of 90% of the dimensions
Effective beam incident diameter Ellipsoidal 30×43mm (Angle of inclinaison)
Dimensions 50 × 50mm
Wavelength range 1064nm
S-Polarization Transmittance (θ=0°) >95%
S-Polarization Transmittance (θ=45°) <5%
Laser Damage Threshold <sup>*</sup> 3.5J/cm2
Availability Please contact
In stock
SKU
VBS-50S03-1-1064
$430.00

Delivery in : 6-12 weeks

With a variable beamsplitter, the incident angle of a laser can be changed. The (R:T) ratios can also be modified. This is commonly used to adjust the light intensity of the laser without a variable adjustment of the light intensity or the laser to be stabilized.

Resources & Downloads

Click here to receive announcements and exclusive promotions

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.