Concurrent-Drive, Two-Channel Controller for PDM Series Piezomotor Actuators

PDM-ID-02

CE
The PDM-ID-02 can drive both channels simultaneously, unlike most other piezomotor controllers. This two-axis controller for PDM-series piezomotor actuators and assemblies can be operated by computer control using the RS232C or USB interface, by the jog switches on the front panel, or by TTL I/O.
◦The jog stick is used for easy manual operation. The speed selecting knob switches jog and step movements for coarse and fine adjustment.
◦ Can be operated from a PC via RS232C/USB interface.
More Information
Name Concurrent-Drive, Two-Channel Controller for PDM Series Piezomotor Actuators
Weight 0.6000kgs
Guide Sample programs and a manual are available for download from our website.
Attention ▶The power supply specification of the PDM-ID-02 is DC+24V 2A. The power supply should be prepared by the customer or purchase AC-ADP-2427. Do not connect this controller to any product other than piezo drive motors (PDM-**ACT).
Number of Control Axes 2 Axes
Mounting Thread M3
Number Channels 2 axes (Can operate simultaneously)
Interface RS232C, USB (virtual COM) recognized as virtual serial port from external PC
Maximum travel speed 1500pps
Manual Speed Setting Four Configurable Settings. Default(1p/step, 10p/step, 100p/step, Continuous)
Manual Jog Operation Toggle switches
Power Voltage DC24V 2.0A
Operating temperature 5 to 40℃
Storage Temperature −20 to 60°C
Ambient Humidity 20 to 80% RH (without condensation)
Dimension Ø x L (Except projection) 50x152.5x100mm
Weight 0.6kg
Required Power Supply P/N AC-ADP-2427
In stock
SKU
PDM-ID-02
$961.00

Delivery in : in stock

The PDM-ID-02 can drive both channels simultaneously, unlike most other piezomotor controllers. This two-axis controller for PDM-series piezomotor actuators and assemblies can be operated by computer control using the RS232C or USB interface, by the jog switches on the front panel, or by TTL I/O.