Reasonable Achromatic Lens 25mm Diameter 50.1mm Focal Length
S-DLB-25-50PM
An economic general use achromatic lens suitable for an optical system, which does not require high surface quality imaging such as a microscope lens or telescope lens.
◦Specification except surface quality is almost the same as DLB series. Except when used in high-precision experiment using a laser, this lens is recommended.
◦It is optimized so that focal length gap is small in the visible light range and the aberration is minimized.
◦It is optimized so that focal length gap is small in the visible light range and the aberration is minimized.
Name | Reasonable Achromatic Lens 25mm Diameter 50.1mm Focal Length |
---|---|
Weight | 0.0140kgs |
Standard Coatings Available | No |
Guide | - |
Remark | - |
Attention |
|
Image Label | Reasonable Achromatic Lens 25mm Diameter 50.1mm Focal Length |
Diameter φD | 25mm |
Focal length | 50.1mm |
Material | BK7, SF2 |
Design wavelength | Blue: 486.1nm, Green: 546.1nm, Red: 656.3nm |
Centration | <3′ |
Coating | Antireflection Coating for the Visible |
Cement | Ultraviolet Hardened Adhesive |
Surface Quality (Scratch-Dig) | 60-40 |
Clear aperture | 90% of the diameter |
Diameter φD | φ25mm |
Focal length f | 50.1mm |
Edge Thickness te | 7.1mm |
Center Thickness tc | 10.9mm |
Back focal length fb | 44.9mm |
In stock
SKU
S-DLB-25-50PM
$70.00
An economic general use achromatic lens suitable for an optical system, which does not require high surface quality imaging such as a microscope lens or telescope lens.