Plano Concave Lens 30mm Diameter −80mm Focal Length 633 - 1064nm

SLB-30-80NIR1

These simple negative lenses have many uses. Alone they form a virtual image of a distant object or collimated light source. Used in combination with other optics they reduce the power of the system. Sharp edges which are common in negative lenses are removed by beveling in order to reduce the likelihood of chipping.
◦There are three types of plano concave lenses available; BK7 for use in visible range to infrared wavelength range.
◦BK7 lenses are also available with three types of anti-reflection coatings, visible wavelength range, in the near-infrared range and in the infrared range.
◦Our lenses are listed by outside diameter and focal length to assist your selection according to required specifications.
More Information
Name Plano Concave Lens 30mm Diameter −80mm Focal Length 633 - 1064nm
Weight 0.0500kgs
Standard Coatings Available No
Guide
  • Lenses are available in a large selection and in custom sizes and focal lengths.
  • In addition to our standard coating we offer custom anti-reflective coating at specific wavelengths.
Remark -
Attention
  • Plano concave lenses are negative lenses that diverge collimated incident light and are primarily used in conjunction with plano convex lenses to shape beams.
  • The plano-concave lens has chromatic aberration, the focal length will vary depending on the wavelength. Please check the “wavelength characteristic of the focal length data” on “Technical Data” for the focal lengths of each wavelength.
  • The plano concave lenses are designed for parallel light to be incident to the concave surface.
  • Transmissions losses due to reflection off the front and rear surfaces of the lens can be minimized by coating the surfaces. Consult our Sales Division for anti-reflection coatings suitable for your application.
  • Sharpe edges are common in negative lenses are removed by beveling in order to reduce chipping may result in smaller then edge thickness. Thicknesses listed in tables are to theoretical sharp edge.
Diameter φD 30mm
Focal length 80mm
Material BK7
Design Wavelength 546.1nm
Refractive index n<sub>e</sub> 1.519
Coating Broadband Multilayer antireflection coating (633 - 1064nm)
Transmmittance > Average 98.5%
Laser Damage Threshold 4J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz)
Clear aperture 85% of the diameter
Surface Quality (Scratch-Dig) 20-10
Wavelength range of Antireflection Coating 633 - 1064nm
Diameter φD φ30mm
Focal length f −80mm
Edge thickness te 4.8mm
Center thickness tc 2mm
Back focal length fb −81.3mm
Radius of curvature r 41.52mm
Centration <1′
In stock
SKU
SLB-30-80NIR1
$76.00

Delivery in : 6-12 weeks

These simple negative lenses have many uses. Alone they form a virtual image of a distant object or collimated light source. Used in combination with other optics they reduce the power of the system. Sharp edges which are common in negative lenses are removed by beveling in order to reduce the likelihood of chipping.

Resources & Downloads

We detect that you are accessing the website from a different region. You will be redirected to a local version of OptoSigma.

Your requested the page :

AMERICA

Redirection to :