25mm Kinematic Flip Bases, M4 Top Thread (8-32 thread in bottom)
FMB-25-UU
×
FMB Kinematic Flip Bases can be flipped just over 90 degrees to allow a mirror mount to be removed from a beam path. Because FMBs have a kinematic mechanism, they can be flipped back into position without losing alignment (within a few arc seconds). They are designed to be mounted to PED-series pedestal posts or standard RO-series 12.7mm posts.
◦FMBs can be used in combination with a pedestal or standard post and mirror mount .
◦These flip mounts have better than 5 arc-second repeatability.
◦These flip mounts have better than 5 arc-second repeatability.
| Name | 25mm Kinematic Flip Bases, M4 Top Thread (8-32 thread in bottom) |
|---|---|
| Weight | 0.0400kgs |
| Guide | Please use the handle to move the flip base rather than touching the mount (e.g. mirror mount) on top of the base. |
| Remark | ◦For best repeatability, slowly rotate the base on and off the kinematic points during the flip process. |
| Attention |
◦To ensure laser safety, please configure the flip base to move the mirror so the reflection points downwards rather than upwards. ◦Please note that only the bottom of the base is threaded as 8-32. The thread on the top of the flip base is M4. |
| Image Label | Optical Path Switching Mount 8-32UNC Thread 25mm |
| Load Capacity | 39.2N (4.0kg) |
| Mounting Thread | M4 |
| Aproximate Flip Angle | 90 deg. |
| Height | 20mm |
| Flip Repeatability | 5″ (25μ rad) |
| Base Thread | 8-32 (note - top thread is M4) |
| Load Capacity | 4.0kgf (8.8 lb) |
In stock
SKU
FMB-25-UU
$146.00
Customize product
FMB Kinematic Flip Bases can be flipped just over 90 degrees to allow a mirror mount to be removed from a beam path. Because FMBs have a kinematic mechanism, they can be flipped back into position without losing alignment (within a few arc seconds). They are designed to be mounted to PED-series pedestal posts or standard RO-series 12.7mm posts.
Resources & Downloads
Related Products
