Vacuum-compatible, 101.6-mm mirror mount, stainless steel, high-stability, front-loading, 2 hex adjusters

VMHX-101.6A

Skip to the beginning of the images gallery

VMHX-series mounts are all-stainless steel, vacuum compatible mounts. To minimize the outgassing, special cleaning, along with vacuum grease and vented holes are provided. BARRIERTA SUPER IS/V vacuum grease is used. The MHX mounts feature a hollow-frame design that not only provides a higher moment of inertia to maximize stiffness but also thinner, reduced-mass sections allowing it to reach thermal equilibrium faster than traditionally designed mounts. Thermal repeatability tests validate the effectiveness of the new frame design, showing lower deflection and equivalent repeatability against rival mounts. The MHX mount is loaded with additional features like center-post mounting, adhesive wells, and keying pin slots, all in the industrys most compact and affordable stainless steel mount. Ideal for interference measurement or precision measurement.

Details

◦ To minimize the outgassing, venting hole and grooving are provided onto screw holes and inset sections.
◦ BARRIERTA SUPER IS/V grease is used for sliding part. MHX-F has three adjustment axes screws that allow the reflecting surface to be moved back and forth in addition to the adjustment of tilt and rotation. (MHX-A has only 2 axes of adjustment screws, so it can only be used for adjustment of tilt and rotation.
Adhesive holes for mirror adhesion and pin holes for anti-rotation and positioning are equipped.
High-density stainless steel is used for the material, but the weight has been reduced by reducing the thickness.
The frame design provides a higher moment of inertia to maximize stiffness and reduced-mass sections allowing it to reach thermal equilibrium faster for maximum stability.

More Information

More Information
Name	Vacuum-compatible, 101.6-mm mirror mount, stainless steel, high-stability, front-loading, 2 hex adjusters
Weight	1.1300kgs
Guide	Regarding how to fix the knob and the lock plate of MHX, use a 2mm hexagon wrench to adjust tilt or rotation. You cannot turn the tilt / rotate screw with your bare hands. In addition, a special screwed knob (MHX-K-M6) is also available instead of the hexagon wrench. A special lock (MHK-L-M6) for holding the adjusted angle is also available. To maintain its high cleanness, special vacuum packing for delivery is provided for each component. Please use vacuum screws VPCB/VAGB when you mount this holder onto a base plate. We also provide vacuum pedestal bases VPST and posts (VRO). We will offer custom products based on your requested specifications.
Attention	Please make sure that open the package in a clean environment and do not touch it with your bare hands.
Optic Loading Side	Front Loading
Angle Range	±2°
Material	Stainless Steel
Number of Control Axes	2 Axes
Optic Diameter	φ101.6mm
Mount Material	Stainless Steel
Compatible Optics Diameter	101.6mm (4 in.)
Compatible Optics Thickness	10 - 20mm
Mirror Loading	Front
Mirror Clamping Mechanism	Set Screw with Torsion Barrier, 2-mm (5/64-in.) Hex Key
Recommended Mirror Clamping Torque	0.07 +/-0.01 Nm (10+/-2 oz.-in.)
Number of Adjustment Axes	2 points
Angular Travel Range	+/-2 Deg
Linear Travel Range	N/A
Adjuster Thread	M6 x 0.250mm (~100 TPI)
Standardized Adjustment Sensitivity (based on 1 deg. knob rotation)	13 urad
Typical Adjustment Sensitivity	2 +/-1 urad
Dowel Pin Keys	2mm Slot and Hole
Standard Mounting	Clearance hole for M6 / 1/4-20 screws
Center-Post Mounting	M6 and 1/4-20 threaded holes

In stock

SKU

VMHX-101.6A

$1,491.00