12.7-mm, Welded Stainless Steel Flexure Mirror Mount, Surface Mounting
FM-12.7L
FM-L series mirror mounts have a welded, unibody design making them exceptionally slim and sturdy - Ideal for industrial Set-and-Forget alignment. Two thin, stiff flexures allow in pitch and yaw axes of the mount to be adjusted independently. FM-L Flexure Mounts are designed to be surface mounted, i.e. mounted onto a flat horizontal surface. They can also be post-mounted owing to the M4 and 8-32 threaded base. A mirror can be mounted on either of the FM mirror mount's sides, allowing you to choose whether you want to adjust the mount from the front or back. The FM-L mounts are loaded with other valuable features like adhesive wells, and keying pin slots. These all-stainless steel mounts are made for standard 12.7-mm (0.5-in.), 25.4-mm (1-in.) diameter mirrors.
All FM and FM-L Flexure Mounts use precision 0.250mm (over 100-TPI) thread pitch adjustment screws for exceptional stability and adjustability.
| Name | 12.7-mm, Welded Stainless Steel Flexure Mirror Mount, Surface Mounting |
|---|---|
| Weight | 0.0640kgs |
| Attention | This mount is a welded assembly and cannot be disassembled. The L-bracket can be removed, however. |
| Angle Range | ±1.5° |
| Material | Stainless Steel |
| Number of Control Axes | 2 Axes |
| Optic Diameter | φ12.7mm |
| Mount Material | Stainless Steel |
| Compatible Optics Diameter | 12.7mm |
| Optical Axis Height | 12.7mm |
| Compatible Optics Thickness | 2 - 6mm |
| Mirror Loading | Rear |
| Mirror Clamping Mechanism | Adhesive or Set Screw, 0.9-mm Hex Key |
| Recommended Mirror Clamping Torque | 0.06 +/-0.01 Nm (8+/-2 oz.-in.) |
| Number of Adjustment Axes | 2 points |
| Angular Travel Range | +/-1.5 deg. |
| Adjuster Thread | M3 x 0.250mm(~100 TPI) |
| Dowel Pin Keys | 2mm Slot and Hole |
| Surface/Post Mounting | Threaded holes for M4 and #8 screws |
In stock
SKU
FM-12.7L
$301.00
Customize product
FM-L series mirror mounts have a welded, unibody design making them exceptionally slim and sturdy - Ideal for industrial Set-and-Forget alignment. Two thin, stiff flexures allow in pitch and yaw axes of the mount to be adjusted independently. FM-L Flexure Mounts are designed to be surface mounted, i.e. mounted onto a flat horizontal surface. They can also be post-mounted owing to the M4 and 8-32 threaded base. A mirror can be mounted on either of the FM mirror mount's sides, allowing you to choose whether you want to adjust the mount from the front or back. The FM-L mounts are loaded with other valuable features like adhesive wells, and keying pin slots. These all-stainless steel mounts are made for standard 12.7-mm (0.5-in.), 25.4-mm (1-in.) diameter mirrors.
Resources & Downloads
Related Products
Check items to add to the cart or
