Dove Prism 30 x 30mm 126.6 length 1/4 wave Surface Flatness Anti-reflection Coated

DOP-30-4M

Dove prisms have the useful property that they completely invert an image by 180 degrees. If the prism is rotated about its axis the image will rotate at twice the rate of rotation of the prism. Dove prisms provide the most convenient and most precise method of rotating a beam and their long length and square profile make them easy to mount in a cylindrical sleeve. Because of the very limited field of view dove prisms need to be used with collimated or near-collimated beams. These prisms are offered with and without a broadband multilayer anti-reflective coating on the end faces. The hypotenuse face acts as a TIR surface and is therefore normally not coated. It is important, therefore, to keep this surface clean.
◦Dove prisms uses a precision fabrication process to ensure minimal light incident axis deviation.
◦We are offering high surface flatness at λ/4 for laser experimental use.
More Information
Name Dove Prism 30 x 30mm 126.6 length 1/4 wave Surface Flatness Anti-reflection Coated
Weight 0.2190kgs
Standard Coatings Available No
Guide
  • AR coating on incident surface and emitting surface and aluminum coat on lower surface can be done as an option. Please consult our Sales Division for coatings suitable for your application.
Remark -
Attention
  • When the prism is in the upright image position, the right and left side images exhibit mirror symmetry.
  • The chromatic aberration may happen when observation of image at high magnification through the dove prism.
  • The D side dimension is to the theoretical sharp edge. Actual measurement may be smaller due to the chamfer.
  • The bottom uncoated surface should be clean of all dirt to minimize being displayed in the image.
Coating AR Visible (400 - 700nm)
Image Label Dove Prism 30 x 30mm 126.6 length 1/4 wave Surface Flatness Anti-reflection Coated
Length 30mm
Material BK7 (Refractive index nd=1.517)
Inclination angle 45°±3′
Coating Anti-reflection coatings
Surface Quality <br> (Scratch-Dig) 20-10
A=B 30mm
Length D 126.6mm
Surface flatness of substrate λ/4
In stock
SKU
DOP-30-4M
$788.00

Delivery in : in stock

Dove prisms have the useful property that they completely invert an image by 180 degrees. If the prism is rotated about its axis the image will rotate at twice the rate of rotation of the prism. Dove prisms provide the most convenient and most precise method of rotating a beam and their long length and square profile make them easy to mount in a cylindrical sleeve. Because of the very limited field of view dove prisms need to be used with collimated or near-collimated beams. These prisms are offered with and without a broadband multilayer anti-reflective coating on the end faces. The hypotenuse face acts as a TIR surface and is therefore normally not coated. It is important, therefore, to keep this surface clean.

Resources & Downloads

Click here to receive announcements and exclusive promotions

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.