ZnSe Meniscus Lens 25.4mm Diameter 38.1mm Focal Length

SLZS2-25.4-38.1PCO2A

Zinc selenide (ZnSe) meniscus Lens (ZnSe) is used as a condensing lens with CO2 laser (10.6μm). The meniscus designed shape is optimized to minimize spherical aberration.
◦With anti-reflection coating the loss due to surface reflection can be reduced, and the laser light with high efficiency can be condensed.
◦ZnSe crystal has little hygroscopic, it can be handled in the same way as a normal optical element.
◦Since ZnSe crystal is a isotropic crystal, it does not have birefringence (polarization characteristics).

Important: Treatment of ZnSe optics
ZnSe (Zinc selenide) is Poisonous and harmful substance classified as legal, depending on the specifications, the certificate of delivery may be required for acquisition of Poisonous and harmful substances. In addition, ZnSe Optics disposal after use is prohibited in general.
Lenses that are no longer needed, please return it to us.

However, we only take back products that we supplied. This policy noted is in Japan and other countries may differ in the treatment of ZnSe (Zinc selenide), please contact your local sales office.
More Information
Name ZnSe Meniscus Lens 25.4mm Diameter 38.1mm Focal Length
Weight 0.0050kgs
Standard Coatings Available No
Guide
  • We can also provide window plates (OPZS / WZSA) made with ZnSe for CO2.
  • WEB Reference Catalog Code/W3152
Remark -
Attention
  • When the high power laser beam is condensed on the surface of ZnSe, due to the thermal decomposition, toxic gas may occur. In addition, a large amount of gas and powder occur when the ZnSe lens is damaged by the laser thermal run-away. If the ZnSe lens is damaged, DO NOT touch the lens by bare hands. Please collect the debris and be careful not to inhale the powder and gas steam generated.
  • Since meniscus lens is a single lens, the focal length will be changed depending on the wavelength.
  • There is a direction to put a light in the Plano convex lens. Please make sure to put the parallel light from the convex side. If it is reserved, the spherical aberration increases, the focused spot becomes large and the image looks blurred.
Image Label ZnSe Meniscus Lens 25.4mm Diameter 38.1mm Focal Length
Diameter φD 25.4mm
Focal length 38.1mm
Material ZnSe
Design Wavelength 10.6μm
Refractive Index 2.403
Centration <3′
Coating Antireflection coating (Wavelength 10.6μm)
(Diameter of φ25.4mm is wavelength of 650nm and 10.6μm)
Clear aperture 90% of the diameter
Surface Quality (Scratch-Dig) 20−10
Diameter φD φ25.4mm
Focal length f 38.1mm
Edge thickness te 3mm
Center thickness tc 4.52mm
Back focal length fb 38.6mm
WD -
In stock
SKU
SLZS2-25.4-38.1PCO2A
$788.00

Delivery in : 6-12 weeks

Zinc selenide (ZnSe) meniscus Lens (ZnSe) is used as a condensing lens with CO2 laser (10.6μm). The meniscus designed shape is optimized to minimize spherical aberration.

Resources & Downloads

Click here to receive announcements and exclusive promotions

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.