Reflective Neutral Density Filter Unmounted (UV) 50mm Diameter 70%

FNDU-50C02-70

The reflective ND filter is used for high power and broadband wavelength light density reducing. The untransmitted light would not be absorbed, there is no possibility of glass damaging by the heat.
◦The metal reflection coating provides an extremely smooth transmission characteristic from the UV to IR wavelengths.
◦We are using synthetic fused silica substrates for high transmission at UV range for the UV ND filter. We can obtain almost the similar transmittance at the Near UV and the visible range.
◦The substrate thickness is 2mm +/−0.1mm with no difference with the transmittance.
More Information
Name Reflective Neutral Density Filter Unmounted (UV) 50mm Diameter 70%
Weight 0.0090kgs
Standard Coatings Available No
Guide
  • Different size, wavelength and deviation not mentioned on-line or in our catalog are available as custom product upon on request.
Remark -
Attention
  • Chrome coating is an absorptive material and can not be used with high power pulsed laser.
  • The thermal lens effect may happen on filter with high power laser, for high power laser or high energy laser, please use our variable beamsplitter (model VBS).
  • WEB Reference Catalog Code/W3022
  • The reflected light off of the filter is dangerous for eyes, please make sure a non-reflective material at the edge end of the light.
  • A vertical light into the filter may have feedback light back into the laser source, it may make an instability to the laser oscillator. To avoid this phenomenon please incline the filter at a small angle.
  • The filter with 92% transmittance rate (model FND-92 and others) is non-coated on both surface. The reflectance is about 4% on each surface, and so, 8% total loss.
Image Label Reflective Neutral Density Filter Unmounted (UV) 50mm Diameter 70%
Diameter φD 50mm
Transmittance 70% (300nm)
Type Ultraviolet (UV)
Material Synthetic fused silica
Coating Chrome coating (Cr) but FNDU-92, MFNDU-92 is no coated
Wavelength Range 200 − 400nm
Parallelism <30″
Surface flatness λ
(Measurement area: φ30mm)
Surface Quality (Scratch-Dig) 60-40
Clear aperture 90% of the diameter
Diameter φD φ50mm
Transmittance (300nm) 0.7
Availability Please contact
In stock
SKU
FNDU-50C02-70
$158.00

Delivery in : in stock

The reflective ND filter is used for high power and broadband wavelength light density reducing. The untransmitted light would not be absorbed, there is no possibility of glass damaging by the heat.

Resources & Downloads

Click here to receive announcements and exclusive promotions

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.