Non-polarizing Cube Half Mirror BK7 10mm 1300nm
NPCH-10-13000
Half mirrors have an even 1:1 ratio of reflection and transmission in both linear polarized light and normal light source.
◦The reflection to transmission ratio is 1:1 regardless of the polarization condition from the input beam.
◦Depending on polarization, the reflection to transmission ratio of these products does not vary.
◦The laser lines listed correspond to various laser wavelengths.
◦Narrowband multi-layer AR coatings are applied to the four surfaces of the cube.
◦These cubes afe designed for a single wavelength because the effective bandwidth of a non-polarizing coating is narrow.
◦Depending on polarization, the reflection to transmission ratio of these products does not vary.
◦The laser lines listed correspond to various laser wavelengths.
◦Narrowband multi-layer AR coatings are applied to the four surfaces of the cube.
◦These cubes afe designed for a single wavelength because the effective bandwidth of a non-polarizing coating is narrow.
| Name | Non-polarizing Cube Half Mirror BK7 10mm 1300nm |
|---|---|
| Weight | 0.0050kgs |
| Standard Coatings Available | No |
| Guide |
|
| Remark | - |
| Attention |
|
| Design wavelength | 1300nm |
| Image Label | Non-polarizing Cube Half Mirror BK7 10mm 1300nm |
| Length | 10mm |
| Material | BK7 |
| Transmittance | 50±5% |
| Material | BK7 |
| Surface flatness of substrate | λ/4 |
| Beam Deviation | <5′ |
| Coating |
Hypotenuse surface ; Dielectric multilayer coating Four surfaces ; Multilayer antireflection coating |
| Incident angle | 0° |
| Divergence ratio <br> (reflectance : transmittance) | 1 : 1 |
| Laser Damage Threshold | 0.3J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz) |
| Surface Quality <br> (Scratch-Dig) | 20-10 |
| Wavelength range | 1300nm |
| A=B=C | 10mm |
| Transmittance | 50±5% |
In stock
SKU
NPCH-10-13000
$346.00
Half mirrors have an even 1:1 ratio of reflection and transmission in both linear polarized light and normal light source.


