3-Wavelengths Objective Lens 20mm Focal Length 10X

PFL-10-UV/NUV-AG

Skip to the beginning of the images gallery

This objective lens can be used for laser machining using pulsed laser of SHG (532nm), THG (355nm), and FHG (266nm) YAG laser. Objective lense provides high transmittance at three harmonic wavelengths of YAG.

Details

◦With its long working distance and corrected field curvature, its natural observation image is obtained to the periphery of viewing the field.
◦It is the long working infinity correction function that is used to introduce a laser system and coaxial observation.
◦It allows observation of the sample with visible light (400 – 500nm).
◦Laser Damage Threshold (Typical) 0.09 J/cm² (266nm), 0.1J/cm² (355nm), 0.2J/cm² (532nm) (Laser pulse width 10ns, repetition frequency 20Hz)

More Information

More Information
Name	3-Wavelengths Objective Lens 20mm Focal Length 10X
Weight	0.3000kgs
Standard Coatings Available	No
Guide	Available fixed objective lens holder (LHO-26). WEB Reference Catalog Code/W4024 When the objective lens is fixed to a 2 axis holder, please consult our Sales Division. For laser processing, we offer a dichroic block (DIMC WEB Reference Catalog Code/W2041) and for laser unit with coaxial illumination and observation (OUCI-2).
Remark	-
Attention	When an objective lens is used in laser processing, use the diameter of the incident beam to extend to a size of half the pupil diameter (1/e²). A small light spot cannot be achieved when the incident beam is too narrow. Please note if there is a laser energy density increase, there will be a high possibility of damage to the objective lens. The surface of an objective lens can be contaminated by debris during processing. To avoid this, please have sufficient working distance (WD) and insert a thin protective glass on the objective. Magnification is the value when using the imaging lens f=200mm. When used in a microscope lens barrel from other manufacturers there may be different magnifications. The actual magnification should be calculated from the ratio of the focal length of the objective lens and the focal length of the imaging lens to verify the focal length of the imaging lens barrel to be used.
Focal length	20mm
Image Label	3-Wavelengths Objective Lens 20mm Focal Length 10X
Magnification	10×
Numerical Aperture	0.2
Working Distance WD	13.5mm
Item name	Mplan UV/NUV 10x
Resolution (λ=550nm)	1.4μm
Focal depth (λ=550nm)	±6.9μm
Pupil diameter	φ8mm
Real field of View (Eyepiece φ24mm)	φ2.4mm
Real field of View (Imaging device 1/2-inch)	0.48×0.64mm
Weight	0.3kg

In stock

SKU

PFL-10-UV/NUV-AG

$9,883.00

3-Wavelengths Objective Lens 20mm Focal Length 10X

Resources & Downloads