Micro-step Driver CMOS Input
SG-514MSC
The motor step angle can be set to 16 different divisions from 1 to 250 divisions by external signal.
Applicable motor is a 5-phase stepping motor with 0.3 to 1.4A/phase.
Drive current and stop time current can be set with the RUN and STOP knobs.
Applicable motor is a 5-phase stepping motor with 0.3 to 1.4A/phase.
Drive current and stop time current can be set with the RUN and STOP knobs.
-
| Name | Micro-step Driver CMOS Input |
|---|---|
| Weight | 0.2000kgs |
| Guide |
|
| Attention | - |
| Image Label | Micro-step Driver CMOS Input |
| Part Name | Micro-step Driver |
| Driving Motor | 5-phase stepping motor |
| Drive System | Bipolar constant current pentagon drive |
| Driving Current | 0.3 − 1.4A/phase |
| Excitation System | Micro-step |
| Number of Divisions | 16 types (1, 2, 2.5, 5, 8, 10, 20, 25, 40, 50, 80, 100, 125, 200, 250) |
| Input Signal | 2 clock input method |
| Input Logic | C-MOS equivalent negative logic input |
| Max. Response Frequency | 500kpps |
| Auto Current Down OFF Input | None |
| Motor Excitation OFF Input | Equipped |
| Micro-step Selection Input | 4 bit signal input |
| Origin Excitation Timing Output | Equipped |
| Input Voltage |
For motor drive : DC24 − 36V ±10% 2A or lower For logic : DC5V ±5% 0.1A or lower |
| Operating Temperature Range | 0 − 40°C |
| External Dimensions | (W)91×(H)36×(D)70mm |
In stock
SKU
SG-514MSC
$229.00
Customize product
The motor step angle can be set to 16 different divisions from 1 to 250 divisions by external signal.
Applicable motor is a 5-phase stepping motor with 0.3 to 1.4A/phase.
Drive current and stop time current can be set with the RUN and STOP knobs.
Applicable motor is a 5-phase stepping motor with 0.3 to 1.4A/phase.
Drive current and stop time current can be set with the RUN and STOP knobs.