Touchscreen Monitor & Controller for Stand-Alone Power/Energy Sensors, Rechargable Battery
PLUS 2
The PLUS 2 is a handheld, touch screen control console for use with Opto Sigma's Stand-Alone Power and Energy sensors. The control console features a color, 4.3-in. high-resolution, 480x272-pixel, touch screen display with an intuitive graphical user interface (GUI). The instrument is powered by a USB-rechargeable lithium battery for a run time of up to 15 hours. Among its features, the PLUS 2 offers a configurable analogue output, easy data logging (with USB thumb-drive) and can also be connected to a standard PC thru the USB port. Software to run the PLUS 2 on a PC is available as a free download. A stainless steel stand provides the instrument with optimum tilt for viewing of the screen when the instrument is placed on a flat surface, such as an optical table.
General wavelength of laser is set in advance for wavelength setting. Other specific wavelength can be input and display easily.
The selected data can be saved in the USB memory via USB Type A port.
The selected data can be saved in the USB memory via USB Type A port.
| Name | Touchscreen Monitor & Controller for Stand-Alone Power/Energy Sensors, Rechargable Battery |
|---|---|
| Weight | 0.6000kgs |
| Guide |
|
| Attention | Ref. PEM-TS-4.3 |
| Compatible Sensor Types | Thermal, Photodiode, Fast-Response (FR) |
| Display | TFT LCD high brightness; 480 x 272 resolution; resistive touch screen; 96 H x 55 W mm |
| Power/Energy-Mode Resolution | 0.01% - 0.1% of Full Scale |
| ADC Sampling Rate | 64 Hz - 192 Hz (depending on sensor head) |
| ADC Resolution | 23 bit |
| Analog Output | 0.025 - 2 V (with 16 bit resolution; 0.0015% resolution) |
| Analog Output Accuracy | +/- 0.1%; +/- 2 mV relative to display |
| Sensor Head Connector | DB15 |
| PC Connector | USB Type B |
| Analog Output Connector | RCA |
| Data Logging Port | USB Type A |
| Power | Built-in Rechargeable Battery Li-Pol; 3.7 V, 3400 mAh, Charged thru USB Type B Port |
| Operating Temperature Range | 5 - 40 C |
| Envelope Dimensions | 170 H x 100 W x 36-50 D (mm) |
| Items in Box | Power/energy meter console, External power supply (USB PC/5V DC), USB cable (USB Type A Connector to USB Type B Connector), USB Flash Drive with instrument drivers, user application and operation manual, Certificate of Calibration |
In stock
SKU
PLUS 2
$1,883.00
Customize product
The PLUS 2 is a handheld, touch screen control console for use with Opto Sigma's Stand-Alone Power and Energy sensors. The control console features a color, 4.3-in. high-resolution, 480x272-pixel, touch screen display with an intuitive graphical user interface (GUI). The instrument is powered by a USB-rechargeable lithium battery for a run time of up to 15 hours. Among its features, the PLUS 2 offers a configurable analogue output, easy data logging (with USB thumb-drive) and can also be connected to a standard PC thru the USB port. Software to run the PLUS 2 on a PC is available as a free download. A stainless steel stand provides the instrument with optimum tilt for viewing of the screen when the instrument is placed on a flat surface, such as an optical table.
Related Products
