Super Mirror 12.7mm Diameter 532nm Wavelength
TFHSM-12.7C06-532
The Fabry-Perot type resonator cavity is often used for measuring extremely high accuracy time or distance with use of the light. Super mirror is a ultra-high performance mirror that surface reflectance is close to 1 (100%) as much as possible in order to increase the performance of the resonator.
◦By using an ion beam sputtering (IBS), high quality and dense coating with few defects has been coated.
◦With a special polishing technique, the low-scattering substrate of surface flatness Ra<0.1nm is used.
◦The mirror coating with reflectivity of 99.999% is achieved from the coating design technology that had been developed for many years.
◦Scattering loss due to the substrate and the coating is very small, when it is incorporated into a cavity, it is to be expected a high finesse and very narrow spectral bandwidth.
◦It is provided two types of wavelength 532nm and 1064nm.
◦With a special polishing technique, the low-scattering substrate of surface flatness Ra<0.1nm is used.
◦The mirror coating with reflectivity of 99.999% is achieved from the coating design technology that had been developed for many years.
◦Scattering loss due to the substrate and the coating is very small, when it is incorporated into a cavity, it is to be expected a high finesse and very narrow spectral bandwidth.
◦It is provided two types of wavelength 532nm and 1064nm.
| Name | Super Mirror 12.7mm Diameter 532nm Wavelength |
|---|---|
| Weight | 0.0050kgs |
| Standard Coatings Available | No |
| Guide |
|
| Remark | - |
| Attention |
|
| Design wavelength | 532nm |
| Diameter φD | 12.7mm |
| Reflectance | 99.995% (The above is the reflectance measured in the CRD method.<br> However, there may vary depending on measurement conditions and measurement method.) |
| Material | Synthetic Fused Silica |
| Coating | Dielectric Multi-layer High-Reflection Coating |
| Incident Angle | 0° |
| Surface flatness | λ/10 |
| Parallelism | <5″ |
| Surface Quality (Scratch-Dig) | 10−5 |
| Clear Aperture | 80% of the diameter |
| Reflectance of rear surface | ＜0.15% |
| Wavelength Range | 532nm |
| Diameter φD | φ12.7mm |
| Thickness t | 6mm |
| Reflectance |
99.995% (The above is the reflectance measured in the CRD method. However, there may vary depending on measurement conditions and measurement method.) |
| Loss |
20ppm (The values indicated in “Loss” is only reference data. These data will not be attached with the product.) |
In stock
SKU
TFHSM-12.7C06-532
$1,103.00
Customize product
The Fabry-Perot type resonator cavity is often used for measuring extremely high accuracy time or distance with use of the light. Super mirror is a ultra-high performance mirror that surface reflectance is close to 1 (100%) as much as possible in order to increase the performance of the resonator.
Resources & Downloads
Related Products
Check items to add to the cart or
