Rail Carriers
Each size of rail has its own series of carriers. These carriers are attached to the rail by releasing the clamp screw and hooking the lip over the dovetail section on the rail. The clamp may then be loosely tightened to permit sliding or fully tightened to lock the carrier in place. On the upper surface of the carriers is a standard inch or metric mounting hole pattern which may be used to attach stages, post holders or other mounting devices. The surface is parallel to the base when in use.
Add Selected to Cart Compare Selected
| For use with rail width (mm) | Carrier Width, W (mm) | Thread Type | Hole Spacing, B (mm) | Type | Dimensions tolerance | Material | Finish |
|---|---|---|---|---|---|---|---|
| 100 | 40 | 1/4 - 20 | 25.4 (1.0 inch) | Inch | ±0.2mm | Aluminum | Black Anodized |
| 100 | 40 | M6 | 25 | Metric | ±0.2mm | Aluminum | Black Anodized |
| 100 | 65 | 1/4 - 20 | 25.4 (1.0 inch) | Inch | ±0.2mm | Aluminum | Black Anodized |
| 100 | 65 | M6 | 25 | Metric | ±0.2mm | Aluminum | Black Anodized |
| 100 | 120 | 1/4 - 20 | 25.4 (1.0 inch) | Inch | ±0.2mm | Aluminum | Black Anodized |
| 100 | 120 | M6 | 25 | Metric | ±0.2mm | Aluminum | Black Anodized |
| 100 | 40 | M16 | - | Metric | ±0.2mm | Aluminum | Black Anodized |
| 100 | 60 | M16 | - | Metric | ±0.2mm | Aluminum | Black Anodized |
| 100 | 80 | M16 | - | Metric | ±0.2mm | Aluminum | Black Anodized |
| 100 | 100 | M16 | - | Metric | ±0.2mm | Aluminum | Black Anodized |