X-Y Lens Holders
-
Holds lenses securely in place
-
Permits X-Y adjustment of the optical axis
-
To suit 20mm, 1inch, 30mm and 2-inch lenses
Lenses may be mounted directly into these holders by means of the retaining ring provided. The optical axis is easily adjusted in two axes by means of the fine pitch, 50TPI (0.5mm) adjusting screws which protrude from the side of the holder. These adjusters operate against a springloaded plunger which will retain the lens in position, once set. The holders may be attached to a post or pedestal base by means of an 8-32 or M4 screw.
Add Selected to Cart Compare Selected
| To Hold Lens Diameter, D (mm) | Clear Aperture, A (mm) | Maximum Lens Thickness, t (mm) | Type | Dimensions tolerance | Material | Finish | Range of Adjustment |
|---|---|---|---|---|---|---|---|
| 20.0 | 17.0 | 12.0 | Inch | ±0.2mm | Aluminum | Black Anodized | ±1.5mm |
| 20.0 | 17.0 | 12.0 | Metric | ±0.2mm | Aluminum | Black Anodized | ±1.5mm |
| 25.4 | 22.0 | 12.0 | Inch | ±0.2mm | Aluminum | Black Anodized | ±1.5mm |
| 25.4 | 22.0 | 12.0 | Metric | ±0.2mm | Aluminum | Black Anodized | ±1.5mm |
| 30.0 | 27.0 | 12.0 | Inch | ±0.2mm | Aluminum | Black Anodized | ±1.5mm |
| 30.0 | 27.0 | 12.0 | Metric | ±0.2mm | Aluminum | Black Anodized | ±1.5mm |
| 50.8 | 47.0 | 14.0 | Inch | ±0.2mm | Aluminum | Black Anodized | ±1.5mm |
| 50.8 | 47.0 | 14.0 | Metric | ±0.2mm | Aluminum | Black Anodized | ±1.5mm |