Pedestal Fork Clamp, Stainless Steel, 25.4mm Slot, 1/4-20 Screw
PSCS-11.5UU
Clamps for Pedestal Bases (PST) can secure Pedestals freely about a tapped hole on a vibration isolator or laboratory bench.
The PSTM is used to add a pedestal base to standard Post Holders with M16 Threads. This allows the Post Holders to be freely positioned like a Pedestal.
The PSTM is used to add a pedestal base to standard Post Holders with M16 Threads. This allows the Post Holders to be freely positioned like a Pedestal.
The PSC-10 series pedestal edge clamps must be used in pairs, for clamping a Pedestal at two positions. The PSCA/PSCS/149 fork is used to clamp a pedestal with single screw.
The long slot on the PSCA /PSCS/149 clamps allows for coarse adjustment in any direction on the mounting surface.The clamp is secured with a single M6 or 1/4-20UNC screw.
| Name | Pedestal Fork Clamp, Stainless Steel, 25.4mm Slot, 1/4-20 Screw |
|---|---|
| Weight | 0.0600kgs |
| Guide | - |
| Attention | - |
| Image Label | Pedestal clamp Stainless steel inch 11.5mm height |
| Material | Stainless Steel |
| Mounting Thread | 1/4-20UNC |
| Material | Stainless Steel |
| Finish | Passivation |
| Screw Thread | 1/4-20 |
| Slot Length | 25.4mm |
| Width at Pedestal Base | 32mm (Pedestal Base is 32mm) |
| Quantity per SKU | 1 Piece |
| Quantity Required To Clamp Pedestal Post | 1 Piece |
In stock
SKU
PSCS-11.5UU
€12.60
Customize product
Clamps for Pedestal Bases (PST) can secure Pedestals freely about a tapped hole on a vibration isolator or laboratory bench.
The PSTM is used to add a pedestal base to standard Post Holders with M16 Threads. This allows the Post Holders to be freely positioned like a Pedestal.
The PSTM is used to add a pedestal base to standard Post Holders with M16 Threads. This allows the Post Holders to be freely positioned like a Pedestal.
Resources & Downloads
Related Products
