30mm Cage Components
OptoSigma’s 30mm CAGE Systems P30 (diameter: 6mm rods, 30mm pitch between the rods A large selection of accessories and adapters are available for integration into optical setups using mounting posts or lens tubes. Optic holders and accessories are supported by four (4) rigid steel rods (CAGES) to mount optical components along a common optical axis. In addition, the optic holders can split the optical axis and the cage into two or fold it 90 degrees. The CAGE system has no distinction of orientation. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system. Our systems are compatible with industry standards, though, our intent was to design and build cage systems that are more stable and accurate vs. others on the market today. A unique feature is the ability to place and remove individual components by “Dropping them In-Place” when 3-rods are utilized. This is highly unique and convenient. Need help specifying components? Our sales engineers are standing by. Contact us anytime.
-
Cage Rod Pitch Conversion PlateSKU : C-RPCPAn adapter plate to convert P30 (Dia. 6mm rods, 30mm pitch between the rods) system into P16 (Dia. 4mm rods, 16mm pitch between the rods). Learn More -
-
Cage Fixed Objective Lens Holders (Slot in)SKU : C-BP-M - SLHO-30Holder for incorporating the objective lens into the cage system. Learn More -
Cage Mounting CubeSKU : C-CB-30◦ Mirror holders are supported by four (or three) rods (cages). In addition, the mirror holder can split the optical axis and the cage into two, or fold it to 90 degrees.
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system. Learn More -
Cage Gimbal Mirror MountSKU : C-CGBH-30◦ Mirror holders are supported by four (or three) rods (cages). In addition, the mirror holder can split the optical axis and the cage into two, or fold it to 90 degrees.
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system. Learn More -
Cage C-mount AdaptersSKU : C-CMA-30Adapter for attaching the C-mount camera and camera lens to C-mount Adapter Mount. Learn More -
Cage Gimbal MountSKU : C-GBH-30◦ Mirror holders are supported by two rods (cages).
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system. Learn More -
Cage Iris Diaphragm HoldersSKU : C-IH-30◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Learn More -
Cage Normal Incidence Mirror MountsSKU : C-KNH-30◦ Mirror holders are supported by four (or three) rods (cages). In addition, the mirror holder can split the optical axis and the cage into two, or fold it to 90 degrees.
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system. Learn More -
Cage Two-axis Optic HoldersSKU : C-LHC - TAT-30◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Learn More -
Cage Polarizer HoldersSKU : C-MPH-30◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Learn More -
-
Cage Prism HoldersSKU : C-PLH - PAD-30◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Learn More -
Cage Post Mounting BaseSKU : C-RMB-30◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system. Learn More -
Cage Guide RodsSKU : C-RO-30◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ Mirror holders are supported by four (or three) rods (cages).
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system. Learn More -
Cage Rod Pitch Conversion PlateSKU : C-RPCP-30◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system. Learn More -
Cage C-mount Adapter MountSKU : C-SCMP-30Holder for incorporating the camera and camera lens attached to the C-mount Adapter into the cage system. Learn More -
Cage Slot in Fixed Optic Mounts (Standard)SKU : C-SMH - BP - SLFH-30◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate of cage system has two types of addon methods which are side-in type and slide-in type. The side-in type can attach and detach the holder plate while the cage system are built. The slide-in type must be built in the cage system beforehand, but it is possible to firmly fix the holder plate to the cage (rod).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Learn More -
Cage Objective Lens Focus MountSKU : C-TBP-30◦ Objective lens focus mount are supported by two rods (cages) Learn More -
Cage Alignment TargetsSKU : C-TGH-30A target plate used for optical axis adjustment of the cage system. Learn More -
Blank Holder for Cage Focus StageSKU : C30-FS-BKPBlank holder used in combination with the Cage focus stage. The point center mark at the center of the optical axis is a diameter of 2 mm as a reference for additional machining. Learn More -
CageCore Iris HolderSKU : C30-CU-IHA diaphragm holder that can be shared with 30mmCage system and core unit. Learn More -
CageCore Multi-Purpose HolderSKU : C30-CU-LCHMulti-purpose holder that can be shared by 30mmCage system and core unit. Since the fixing screw is in 4 directions, it can be used as a holder of dia. 15mm or less or a simple cross motion holder. Learn More -
CageCore Sample Holder Assemble with OBSSKU : C30-CU-RPCPSA plate to connect the core unit system to the 30mmCage system in a coaxial manner. Learn More -
CageCore Stage Mounting BaseSKU : C30-CU-OLSMA stage mount base for the core unit that allows to mount a 25x25mm or 40x40mm size stage and an objective lens to achieve a compact sample observation unit. Learn More -
CageCore Rod Conversion PlateSKU : C30-CU-RPCP-PA plate to convert 16mm cage systems, 30mm cage systems and core units to each other. Learn More -
CageCore Mount for C Mount CameraSKU : C30-CU-SCMPIt is a holder for incorporating the camera and camera lens attached to the C-mount Adapter into the core unit for microscopy Learn More