Z axis Aluminum Ball Slide Stages

TBM-603FP

Stages with an aluminum main unit and a HQG shaft and ball slide. Ideal for use with relatively lightweight devices.

More Information
Name	Z axis Aluminum Ball Slide Stages
Weight	0.5000kgs
Guide	The part number suffix FP indicates products with fine-pitch screws instead of standard micrometers. Fine Pitch screws have a screw pitch of 0.25mm and require a hex wrench or the optional hex wrench with knob (KCL) for adjustment.(WEB Reference Catalog Code/W8008-3)
Attention	The structure does not allow upside down installation since the spring inside the stage might not be able to withstand the load and may stretch. Since the structure uses the principle of leverage, the feed rate fluctuates against the scale depending on the travel (about ±0.02mm for micrometer head 0.5mm/rotation).
Image Label	Z axis Aluminum Ball Slide Stages
Stage Size	60×60mm
Travel	±5mm
Load Capacity	49N (5.0kg)
Stage Size	60×60mm
Travel	±5mm
Lead of Actuator	0.25mm
Load Capacity	49N(5.0kgf)
Travel Accuracy / Straightness	2.5μm
Max. Moment Capacity / Pitch	3.9N･m
Max. Moment Capacity / Roll	3.9N･m
Moment Stiffness / Pitch	1.84″/N･cm
Moment Stiffness / Roll	1.84″/N･cm

In stock

SKU

TBM-603FP

€287.60

Stages with an aluminum main unit and a HQG shaft and ball slide. Ideal for use with relatively lightweight devices.