25X25mm Piezo Assist Z-Axis Stage (Vertical Platform/Base), Right Hand Adjuster +/-3mm M2 Threads

TADC-251SRZPA

CE
Vertical mounting type Z-axis stage that allows fine adjustment of 20nm or less by adding a piezo assist mechanism to the manual stage. Ideal for manual stage units and systems that require high resolution position adjustment. Stage sizes 25x25, 40x40, 60x60, and 65x65mm are available.

See the Left Handed version of this product


◦A dedicated controller for the piezo assist stage easily perform fine adjustment without any setting. The fine adjustment of the dial type knob can be used without resistance even in combination with a micrometer head.
More Information
Name 25X25mm Piezo Assist Z-Axis Stage (Vertical Platform/Base), Right Hand Adjuster +/-3mm M2 Threads
Weight 0.0700kgs
Guide ▶Use the piezo assist controller (PASC) to adjust the fine movement mechanism. A piezo assist controller connection cable (2m) is included with the piezo assist stage.
Attention ▶When installing the stage, be careful not to give a shock to the micrometer bracket. Otherwise, the piezo assist mechanism may be damaged.
▶ When the power of the piezo assist dedicated controller (PASC) is turned off, the position adjustment of the piezo assist will be changed, and position for fine adjustment will be shifted.
Stage Size 25×25mm
Travel ±3mm
Mounting Thread M2
Stage Size 25×25mm
Travel of Coarse Drive ±3mm
Travel of Fine Drive >25μm
Micrometer Position Side
Lead of Actuator 0.5mm
Micrometer Readable Resolution 0.01mm
Piezo resolution <20nm
Guide Method Extended Contact Ball Bearing Guide
Primary Material Aluminum
Finish Black anodized
Load Capacity 9.8N(1.0kgf)
Travel Accuracy / Straightness 3μm
Squareness -
Max. Moment Capacity / Pitch 1.47N・m
Max. Moment Capacity / Roll 1.47N・m
Moment Stiffness / Pitch 6.0″/N・cm
Running Parallelism 20μm
Weight 0.07kg
In stock
SKU
TADC-251SRZPA
€799.40

Delivery in : 1 week

Vertical mounting type Z-axis stage that allows fine adjustment of 20nm or less by adding a piezo assist mechanism to the manual stage. Ideal for manual stage units and systems that require high resolution position adjustment. Stage sizes 25x25, 40x40, 60x60, and 65x65mm are available.

Resources & Downloads

We detect that you are accessing the website from a different region. You will be redirected to a local version of OptoSigma.

Your requested the page :

EUROPE

Redirection to :