Low Dispersion Mirror for High Power Femtosecond Laser / 1/2'' / 1030nm

FLMHP-12.7C05-1030

This mirror is designed to provide low wavelength dispersion suitable for use with ultra-short pulse lasers with 100 femtosecond or less.

We have designed a special thin film coating that optimizes wavelength dispersion, range, and the power of lasers.
It has the effect of suppressing the spread of the pulse width produced by a plurality of reflecting mirrors.
There are three types available, FLM1 standard, FLM2 wide wavelength band, and FLMHP for high power femtosecond laser^*.
These mirrors are designed and produced for usage within the microscopy with femtosecond laser and optical systems with femtosecond time-resolved spectroscopy.

More Information
Name	Low Dispersion Mirror for High Power Femtosecond Laser / 1/2'' / 1030nm
Weight	0.1000kgs
Standard Coatings Available	No
Guide	These low dispersion wavelength mirrors are available in physical dimensions other than those found in the catalog, please contact our Sales Division for Custom products. We can also provide high power negative dispersion mirror. Also available are our surface flatness guarantee (HTFM) mirrors with accuracy guarantee after surface coating.
Attention	When used in angles other than 45 degrees (AOI), we would not be able to guarantee the wavelength dispersion. For the dielectric multi-layer film, the reflection rate wavelength characteristics vary depending on the polarization state of the incident beam. The reflection rate of P polarization is lower than that of S polarization and the reflection band is narrow. The reflectance specification are represented by the average of the reflectance of P polarized light and S polarized light.
Design wavelength	1030nm
Diameter	12.7mm
Diameter φD	12.7mm
Incident Angle	45°
Material	Synthetic fused silica
Rear Surface	Polished
Parallelism	<3'
Surface Flatness	λ/10
Coating	Dielectric multi-layer coating
Surface Quality (Scratch-Dig)	10 - 5
Clear aperture	80% of the diameter
Wavelength Range (S polarization)	1000 - 1060 nm
Wavelength Range (P polarization)	1000 - 1060 nm
Thickness t	5 mm
Reflectance	＞99.9%
Laser Damage Threshold	0.25 J/cm2( Laser pulse width: 200 fs, wavelength: 1030 nm )

Out of stock

SKU

FLMHP-12.7C05-1030

€1,268.90

This mirror is designed to provide low wavelength dispersion suitable for use with ultra-short pulse lasers with 100 femtosecond or less.