120mm Diameter, Brass, Crossed-Roller Bearing Rotation Stage, 360 Deg Manual Rotation, +/-4 Deg Fine Adjustment, Hex Screw Drive, M6 Threads
KSPB-1206FPH-M6
        ×
        
    
    

Low profile rotation stages offer coarse rotation adjustment of 360° and fine adjustment (with either a micrometer head or fine-pitch screw).
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.
| Name | 120mm Diameter, Brass, Crossed-Roller Bearing Rotation Stage, 360 Deg Manual Rotation, +/-4 Deg Fine Adjustment, Hex Screw Drive, M6 Threads | 
|---|---|
| Weight | 1.1000kgs | 
| Guide | 
                            
  | 
                    
| Attention | - | 
| Image Label | Rotation Stage Brass 120mm with Aperture 360 Degree Course Adjustment and 8 Degree Fine Pitch Screw Adjustment and Lockable with Metric M6 Holes | 
| Stage Size | φ120mm | 
| Rotation Range | Coarse:360° Fine:±4° | 
| Load Capacity | 196N (20.0kg) | 
| Mounting Thread | M6 | 
| Stage Size | φ120mm | 
| Rotation Range | Coarse:360° Fine:±4° | 
| Scale Readable Resolution | 5′ | 
| Micrometer Readable Resolution | - | 
| Guide Method | Crossed roller | 
| Primary Material | Brass | 
| Finish | Super black chrome | 
| Load Capacity | 196N(20.0kgf) | 
| Max. Moment Capacity | 7.8N・m | 
| Moment Stiffness | 0.1″/N・cm | 
| Parallelism | 50μm | 
| Eccentricity | 30μm | 
| Wobble | 20μm | 
            In stock
        
    
            SKU
        
KSPB-1206FPH-M6
    
    
                €836.20
                            
            
            
Low profile rotation stages offer coarse rotation adjustment of 360° and fine adjustment (with either a micrometer head or fine-pitch screw).
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.
    

