Spatial Filter Holder Inch with OBL-10 and Micrometer
SFB-16RO-OBL10-25-UU
Spatial filters eliminate distorted laser wavefronts and noise to emit clean spherical waves for beams. Used in optical systems such as interferometers and holograms where wavefront quality is critical.
◦A well corrected achromat in the output beam of the spatial filter can be used to collimate the filtered beam.
◦The translation stage and two-axis pinhole allows the light through the objective lens to have good reproducibility..
◦Designed with an emphasis on stability, beam movement during adjustment is minimal.
◦A PA-25 (hole diameter 25μm) pinhole is included. Pinholes can be changed to match the diameter of the laser spot.
◦A Coarse/fine pinhole adjustment (SFB-16DMRO) is also available.
◦To meet a variety of requirements, the mounting position of the objective lens can be changed, allowing objective lenses with different magnifications to be used.
◦The translation stage and two-axis pinhole allows the light through the objective lens to have good reproducibility..
◦Designed with an emphasis on stability, beam movement during adjustment is minimal.
◦A PA-25 (hole diameter 25μm) pinhole is included. Pinholes can be changed to match the diameter of the laser spot.
◦A Coarse/fine pinhole adjustment (SFB-16DMRO) is also available.
◦To meet a variety of requirements, the mounting position of the objective lens can be changed, allowing objective lenses with different magnifications to be used.
| Name | Spatial Filter Holder Inch with OBL-10 and Micrometer |
|---|---|
| Weight | 0.4100kgs |
| Guide |
SFB-16RO-N and SFB-16DMRO-N (commonly called as M6 type) and SFB-16RO-UU and SFB-16DMRO-UU (commonly called as Inch type) are of the types in which rods are eliminated from SFB-16RO and SFB-16DMRO. |
| Attention |
|
| Image Label | Spatial Filter Holder Inch with OBL-10 and Micrometer |
| Objective Lens | OBL-10 |
| Objective Lens Length A | 30.5mm |
| Compatible Incidence Beam diameter(1/e | φ1.0mm |
| Pinhole Diameter | φ25μm |
| Pinhole XY Adjustment Range | ±2mm |
| Objective Lens Front and Back Adjustment Range | ±3mm |
| Pinhole XY Coarse Resolution | - |
| Pinhole XY Scale MIN Reading | 0.01mm/DIV |
| Objective Lens Front and Back Scale MIN Reading | 0.01mm/DIV |
In stock
SKU
SFB-16RO-OBL10-25-UU
Customize product
Spatial filters eliminate distorted laser wavefronts and noise to emit clean spherical waves for beams. Used in optical systems such as interferometers and holograms where wavefront quality is critical.