Gold Flat Mirror BK7 50mm Diameter

TFG-50C08-10

Skip to the beginning of the images gallery

Gold (Au) coated reflection mirrors have high reflectance over wide infrared range.

◦Chromium (Cr) is used as the undercoated to better reinforce the adhesion of gold to the substrate.
◦ Gold mirrors with silicon substrates have higher durability than glass because gold coating adheres much stronger to silicon and has a higher thermal conductivity. (thermal conductivity of silicon is 111 times better compared to glass)

More Information

More Information
Name	Gold Flat Mirror BK7 50mm Diameter
Weight	0.0400kgs
Standard Coatings Available	No
Guide	Please contact our Sales Division for customized products. (customize outer diameter, etc.) Pyrex® is a registered trademark of Corning Inc. Please refer to here for "Wavelength Characteristic Data (Reference Data, Transmittance: T[%]) " for each wavelength.
Remark	-
Attention	When silicon mirrors are water-cooled, heat dissipates more quickly and they have higher durability. Since gold coating has an extremely low mechanical strength, extra care should be taken and it is recommended that cleaning of the surface be limited to blowing off the coated surface. Reflectance of the specification are represented by the average of the reflectance of P polarized light and S polarized light.
Diameter φD	50mm
Material	BK7
Rear Surface	Polished
Material	BK7
Coating	Cr (Chromium)+Au(Gold)
Parallelism	＜3′
Surface Quality (Scratch-Dig)	40-20
Clear aperture	Circle of 90% of the diameter or Circle that inscribed in a square of 90% of the dimensions
Type	Glass Circle
Quantity	1 piece
Optics Size	φ50mm
Thickness t	8mm
Surface Flatness (Wavelegth 632.8nm)	λ/10
Surface Flatness (Convert at 10.6μm)	λ/160
Rear surface	Polished

In stock

SKU

TFG-50C08-10

₹17,864.00

Gold (Au) coated reflection mirrors have high reflectance over wide infrared range.

Gold Flat Mirror BK7 50mm Diameter

Resources & Downloads