Near Infrared Achromatic Lens 15mm Diameter 25.0mm Focal Length

DL-15-25PNIR

By bonding two lenses with wavelength dispersion of different refractive index the resulting component will provide reduced spherical aberration and chromatic aberration than that of a single spherical lens. These achromatic lenses can be used as a focusing lens for YAG laser (1064nm) or LD of the near-infrared.
◦The lens design is optimized so that the focal length change is minimized in the near infrared region. The focal length matches at 700nm, 880nm, 1100nm wavelengths and is optimized to minimize aberrations.
◦It is suitable as a collimating lens not only because chromatic aberration but also spherical aberration is collected.
More Information
Name Near Infrared Achromatic Lens 15mm Diameter 25.0mm Focal Length
Weight 0.0050kgs
Standard Coatings Available No
Guide
  • For product other diameter size or focal lengths which are not listed on our website or in our catalog, please contact our Sales Division with your requests.
  • The design and manufacture of achromatic lens of other wavelength bands are available upon requested.
  • Focusing Lenses for Fiber Lasers (HFTLSQ/HFDLSQ) are also available.
  • WEB Reference Catalog Code/W3080
Remark -
Attention
  • Please use achromatic lens when focusing an image at infinity or when making parallel light from the one point of light source. It does not provide sufficient optical performance when used in such as short-range distance imaging.
  • There is a direction to the incident light parallel to the achromatic lens. A surface with a small radius of curvature is allowed to be incident parallel light from a rear surface (the surface the arrow is pointing to). When it is incident parallel light from the opposite side, spherical aberration and chromatic aberration will occur and the focused spot size will increase.
  • When used in the visible region, spherical aberration and chromatic aberration increases. In addition, the transmittance decreases.
Image Label Near Infrared Achromatic Lens 15mm Diameter 25.0mm Focal Length
Diameter φD 15mm
Focal length 25mm
Material N-LAK22, SF6
Design wavelength 700nm, 880nm, 1100nm
Coating Multi-layer anti-reflection coating (700 – 1550nm)
Cement Ultraviolet Hardened Adhesive
Laser Damage Threshold 0.3J/cm2
Surface Quality (Scratch-Dig) 40-20
Diameter φD φ15mm
Focal length f 25mm
Edge thickness te 5.8mm
Center thickness tc 8.1mm
Back focal length fb 20.6mm
Centration <3′
In stock
SKU
DL-15-25PNIR
£98.17

Delivery in : 1 week

By bonding two lenses with wavelength dispersion of different refractive index the resulting component will provide reduced spherical aberration and chromatic aberration than that of a single spherical lens. These achromatic lenses can be used as a focusing lens for YAG laser (1064nm) or LD of the near-infrared.

Resources & Downloads

We detect that you are accessing the website from a different region. You will be redirected to a local version of OptoSigma.

Your requested the page :

UNITED KINGDOM

Redirection to :