Reasonable Achromatic Lens 25mm Diameter 119.8mm Focal Length

S-DLB-25-120PM

An economic general use achromatic lens suitable for an optical system, which does not require high surface quality imaging such as a microscope lens or telescope lens.
◦Specification except surface quality is almost the same as DLB series. Except when used in high-precision experiment using a laser, this lens is recommended.
◦It is optimized so that focal length gap is small in the visible light range and the aberration is minimized.
More Information
Name Reasonable Achromatic Lens 25mm Diameter 119.8mm Focal Length
Weight 0.0090lbs
Standard Coatings Available No
Guide -
Remark -
Attention
  • Achromatic lens is used when focusing an image at infinity or when making the point light source to collimated light. It does not provide sufficient optical performance when used in such as short-range imaging.
  • There is a direction of the incident parallel light with achromatic lens. The radius of curvature is allowed to be incident parallel light from the side of (the surface indicated by arrows) small curvature surface. If the parallel light incidents from the opposite side, then spherical aberration and chromatic aberration occur and the focused spot size will be large.
Image Label Reasonable Achromatic Lens 25mm Diameter 119.8mm Focal Length
Diameter φD 25mm
Focal length 119.8mm
Material BK7, SF2
Design wavelength Blue: 486.1nm, Green: 546.1nm, Red: 656.3nm
Centration <3′
Coating Antireflection Coating for the Visible
Cement Ultraviolet Hardened Adhesive
Surface Quality (Scratch-Dig) 60-40
Clear aperture 90% of the diameter
Diameter φD φ25mm
Focal length f 119.8mm
Edge Thickness te 5.6mm
Center Thickness tc 7.2mm
Back focal length fb 116.2mm
In stock
SKU
S-DLB-25-120PM
SGD 60.40

Delivery in : 1-3 weeks

An economic general use achromatic lens suitable for an optical system, which does not require high surface quality imaging such as a microscope lens or telescope lens.

Resources & Downloads

We detect that you are accessing the website from a different region. You will be redirected to a local version of OptoSigma.

Your requested the page :

SINGAPORE

Redirection to :