Laser Line Plate Half Mirror 30mm Diameter 308-355nm
PSMH-30C03-10-308/355
Laser line plate mirrors are plate beamsplitters that are optically coated with dielectric multi-layer on the front surface of optical parallels or wedged substrates. The rear surface is coated with multi-layer anti-reflection.
◦Half mirrors divide input beam into reflectance and transmittance ratio of 1:1. A beamsplitter of R:T=1:1 is called “Half Mirror”.
◦Any loss from the input beams of this product is minimized because dielectric coatings have no absorption properties. However, the input ratio of reflection to transmission depends on wavelength, polarization and angle of incident of input beam.
◦Plate beamsplitters have beam deviations on transmission and ghost on rear surface reflections. Wedged substrates are used to prevent ghosting.
◦Any loss from the input beams of this product is minimized because dielectric coatings have no absorption properties. However, the input ratio of reflection to transmission depends on wavelength, polarization and angle of incident of input beam.
◦Plate beamsplitters have beam deviations on transmission and ghost on rear surface reflections. Wedged substrates are used to prevent ghosting.
| Name | Laser Line Plate Half Mirror 30mm Diameter 308-355nm |
|---|---|
| Weight | 0.0050lbs |
| Standard Coatings Available | No |
| Guide |
|
| Remark | - |
| Attention |
|
| Design wavelength | 308 - 355nm |
| Image Label | Laser Line Plate Half Mirror 30mm Diameter 308-355nm |
| Diameter φD | 30mm |
| Material | Synthetic fused silica |
| Reflectance : Transmittance | T=Average 50±5% |
| Material | Synthetic fused silica |
| Surface flatness | λ/10( PSMH-157 is Polished) |
| Coating |
Front surface ; Dielectric multilayer coating Rear surfaces ; Multilayer antireflection coating |
| Incident angle | 45° |
| Divergence ratio <br> (reflectance : transmittance) | 1 : 1 |
| Surface Quality <br> (Scratch-Dig) | 10-5 (PSMH-157 ; 40-20) |
| Wavelength range | 308-355nm |
| Diameter φD | φ30mm |
| Thickness t | 3mm |
| Parallelism<br>Wedge angle W | ＜5″ |
| Reflectance R<br>Transmittance T | T=Average 50±5% |
| Laser Damage Threshold<sup>*</sup> | 2J/cm2 |
| Availability | From stock |
| *Laser Pulse width ; 10ns , Repetition frequency ; 20Hz |
In stock
SKU
PSMH-30C03-10-308/355
SGD 405.50
Customize product
Laser line plate mirrors are plate beamsplitters that are optically coated with dielectric multi-layer on the front surface of optical parallels or wedged substrates. The rear surface is coated with multi-layer anti-reflection.
Resources & Downloads
Related Products
Check items to add to the cart or
