Cage Rod Orthogonal Adapter
C32-LADP-3232
Cage Rod Orthogonal adapter is used to assemble 16mm cage system with 30mm cage system which are in orthogonal. There are four through holes with diameter of 4mm on the front of the adapter and two through holes with diameter of 6mm on the side. Rod fixing screws are supplied for each through holes.
| Name | Cage Rod Orthogonal Adapter |
|---|---|
| Weight | 0.0460lbs |
| Guide |
▶Please contact our Sales for methods to fix the cage system to other equipment and parts not included in the WEB catalog. ▶For consultation of optical system using cage system please contact Sales. |
| Attention |
▶If the rod is tightened too tightly or if the tightening force is greatly different depending on the location, the rod may not fit in other holders. ▶Initially fix the rod lightly, after building the optical system, please tighten so that the force that fixes the rod is even in each holder. ▶When configuring a large optical system or a long optical system, it may become distorted or become unstable due to vibration. |
| Primary material | Aluminum |
| Guide Rod Diameter (Spaceing between rod) | φ6mm （32x32mm) |
| Mounting Screw Size (Aperture Diameter) | M30.85 P0.75 |
In stock
SKU
C32-LADP-3232
SGD 84.10
Customize product
Cage Rod Orthogonal adapter is used to assemble 16mm cage system with 30mm cage system which are in orthogonal. There are four through holes with diameter of 4mm on the front of the adapter and two through holes with diameter of 6mm on the side. Rod fixing screws are supplied for each through holes.
