MplanApo NIR 100x

PAL-100-NIR

This is a high NA infinity corrected objective lens for laser processing (femtosecond laser and fundamental of YAG laser). You can also observe the laser beam coaxially with a laser processed surface that is designed to reduce the aberration of the visible wavelength.
◦Mit seinem langen Arbeitsabstand und der korrigierten Feldkrümmung wird sein natürliches Beobachtungsbild bis zum Rand des Gesichtsfelds erhalten.
◦Es ist die lang arbeitende Unendlich-Korrekturfunktion, die verwendet wird, um ein Lasersystem und eine koaxiale Beobachtung einzuführen.< br>◦Es wird auch für die Beobachtung von Infrarotlicht verwendet.
◦PAL-20-NIR-LC00/PAL-20-NIR-HR-LC00/PAL-50-NIR-HR-LC00 enthalten Schutzglaseinheit ( t = 1,8 mm). Das Schutzglas schützt die Objektivlinse vor Schmutzspritzern und Streuungen durch die Laserbearbeitung. Die Schutzglaseinheit kann ausgetauscht werden.
◦Diese Vielzahl von Objektiven kann mit einem Pulslaser für sichtbares Licht wie 532 nm verwendet werden. Die Schadensschwelle jeder Linse beträgt 0,1 J/cm2 bei 532 nm, 0,2 J/cm2 bei 1064 nm (Referenz). (Laserpulsbreite 10nSec, Wiederholfrequenz 20Hz)
Weitere Informationen
Name MplanApo NIR 100x
Gewicht 0.3400kgs
Standardbeschichtungen verfügbar Nein
Leitfaden
  • Available fixed objective lens holder (LHO-26).
  • WEB-Referenzkatalogcode/W4024
  • When the objective lens is fixed to a 2 axis holder, please consult our Sales Division.
  • For laser processing, we offer a dichroic block (DIMC WEB-Referenzkatalogcode/W2041) and for laser unit with coaxial illumination and observation (OUCI-2).
Achtung
  • When an objective lens is used in laser processing, use the diameter of the incident beam to extend to a size of half the pupil diameter (1/e2). A small light spot cannot be achieved when the incident beam is too narrow. Please note if there is a laser energy density increase, there will be a high possibility of damage to the objective lens.
  • The surface of an objective lens can be contaminated by debris during processing. To avoid this, please have sufficient working distance (WD) and insert a thin protective glass on the objective.
  • If the incident laser beam femtosecond is below 100fs, there is a possibility that the pulse width will spread.
  • Magnification is the value when using the imaging lens f=200mm. When used in a microscope lens barrel from other manufacturers there may be different magnifications. The actual magnification should be calculated from the ratio of the focal length of the objective lens and the focal length of the imaging lens to verify the focal length of the imaging lens barrel to be used.
  • PAL-20-NIR-HR-LC00/PAL-50-NIR-HR-LC00 is designed in consideration of the thickness of including protective glass. If user removes the protective glass, the objective will not meet the performance specifications noted.
Vergrößerung 100×
Numerische Apertur 0.53
Arbeitsabstand WD 12.1mm
Brennweite 2mm
Auflösung 0.52μm
Fokustiefe ±0.98μm
Pupillendurchmesser φ2.12mm
Echtes Sichtfeld (Eyepiece φ24mm) φ0.24mm
Echtes Sichtfeld (Bildgebungsgerät 1/2-inch) 0.05×0.06mm
Auf Lager
SKU
PAL-100-NIR
3.450,00 €

Delivery in : 6-12 weeks

This is a high NA infinity corrected objective lens for laser processing (femtosecond laser and fundamental of YAG laser). You can also observe the laser beam coaxially with a laser processed surface that is designed to reduce the aberration of the visible wavelength.

Resources & Downloads

We detect that you are accessing the website from a different region. You will be redirected to a local version of OptoSigma.

Your requested the page :

EUROPE

Redirection to :

Click here to receive announcements and exclusive promotions

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.