High-Power Laser Beam Expander

BEHP-3-500/570

These laser beam expanders are designed for use with a high-power laser.
It supports a broader wavelength range than the current models.
It can be used in an optical system with high precision, such as a laser interferometer and processing by the lens design that takes into account the wavefront aberration.
◦The optical design of the beam expander is an air gap configuration that does not use an adhesive to bond the lenses. This allows the beam expander to be used with a high-power laser.
◦It is designed and coated to enable to use in a broader wavelength range than the current models.
◦By turning the diopter ring that is attached to the center of the beam expander, you can make variable beams such as the focused beam, collimated beam, and the divergent beam. It is used when you want to vary the position of the beam waist and if strict collimation adjustment is necessary.
More Information
Name High-Power Laser Beam Expander
Weight 0.2100kgs
Guide
  • We also can provide a holder for our laser beam expander (KLH-BE) for the fine adjustment with tilt angle and to secure the beam expander. WEB Reference Catalog Code/W4147
Attention
  • The laser energy density at small aperture(output aperture) will become higher than LIDT when reducing the beam diameter and the Beam expander might be broken.
  • It may not be able to obtain the expected function when the beam expander is used in the opposite direction (reducing the beam diameter). Please refer the technical note of he laser beam expander for details.
Design wavelength 500 - 532nm
Beam magnification
Output aperture diameter φ26mm
Input Clear aperture φ8mm
Effective incident beam diameter at incident angle ± 1 ° φ6mm
AR coating wavelengths 500 - 570nm
Transmittance (AR coat calculated value) >99% (532nm), >98% (515nm), >98% (500-570nm)*2
>65% (600-700nm)
Transmitted wavefront distortion (P-V) < λ/10 (design value for input dia. of 6mm.)
Reference <λ/4 (input beam dia. 6mm, 632.8nm)*3
Laser Damage Threshold <sup>*1</sup> 5.0J/cm2
Weight 0.21kg
Availability Please contact
*1 Laser pulse width ; 10ns , Repetition frequency ; 20Hz
*2 The transmittance of the beam expander differs depending on the wavelength and/or input beam diameter.
In stock
SKU
BEHP-3-500/570
$812.00

Delivery in : 6-12 weeks

These laser beam expanders are designed for use with a high-power laser.
It supports a broader wavelength range than the current models.
It can be used in an optical system with high precision, such as a laser interferometer and processing by the lens design that takes into account the wavefront aberration.

Resources & Downloads

Click here to receive announcements and exclusive promotions

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.