80mm Diameter, Aluminum, Lapped-Surface Bearing Rotation Stage, 360 Deg Manual Rotation, +/-5 Deg Fine Adjustment, Micrometer Drive, M4 Threads

KSPA-806M

3d-simple-product
Low profile rotation stages offer coarse rotation adjustment of 360° and fine adjustment (with either a micrometer head or fine-pitch screw).
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.



More Information
Name 80mm Diameter, Aluminum, Lapped-Surface Bearing Rotation Stage, 360 Deg Manual Rotation, +/-5 Deg Fine Adjustment, Micrometer Drive, M4 Threads
Weight 0.5000kgs
Guide
  • Most stages can be directly mounted to corresponding sized linear stages for multiple axis adjustments.
  • Using the top plate for KSP/KSPA (SP-103) to convert mounting holes, various stages can be mounted. (WEB Reference Catalog Code/W6059)
  • Mounting holes can be converted using the bottom plate for KSPA-806M/1006M (SP-117). (WEB Reference Catalog Code/W6063)
  • The part number suffix FP indicates products with fine-pitch screws instead of standard micrometers.
  • Fine Pitch screws have a screw pitch of 0.25mm and require a hex wrench or the optional hex wrench with knob (KCL) for adjustment.(WEB Reference Catalog Code/W8008-3)
Attention -
Image Label Rotation Stage Aluminum 80mm with 360 Degree Course Adjustment and 10 Degree Fine Micrometer Adjustment and Lockable with Metric Holes
Stage Size φ80mm
Rotation Range Coarse:360° Fine:±5°
Load Capacity 58.8N (6.0kg)
Mounting Thread M4
Stage Size φ80mm
Rotation Range Coarse:360° Fine:±5°
Scale Readable Resolution 5′
Micrometer Readable Resolution about 1′08.8″
Guide Method Lapping method
Primary Material Aluminum
Finish Black anodized
Load Capacity 58.8N(6.0kgf)
Max. Moment Capacity 1.0N・m
Moment Stiffness 0.8″/N・cm
Parallelism 50μm
Eccentricity 20μm
Wobble 20μm
In stock
SKU
KSPA-806M
$395.00

Delivery in : 6-12 weeks

Low profile rotation stages offer coarse rotation adjustment of 360° and fine adjustment (with either a micrometer head or fine-pitch screw).
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.

Resources & Downloads

Click here to receive announcements and exclusive promotions

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.