Chromium Plate Half Mirror 100mm Diameter 400 - 700nm

PSCH-100C10-10-550

Chromium plate half mirrors are plate beamsplitters that are coated with chromium (Cr) on the front surface of optical parallels or wedged substrates. The other surface is coated with multi-layer anti-reflection.
◦Half mirror divides input beam into reflectance and transmittance ratio of 1:1. A beamsplitter of R:T=1:1 is called “Half Mirror”.
◦Approximately one third of the input beam is lost because of the absorption of chromium. However these beamsplitters do not depend on wavelength, polarization and angle of incidence of the input beam, and provide a highly neutral reflectivity.
◦Plate beamsplitters have beam deviations on transmission and ghost on rear surface reflections. Wedged substrates are used to prevent ghosting.
More Information
Name Chromium Plate Half Mirror 100mm Diameter 400 - 700nm
Weight 0.1980kgs
Standard Coatings Available No
Guide
  • Please contact our Sales Division for customized products. (Customized on size, wavelength or R:T, etc.)
  • WEB Reference Catalog Code/W3802
  • For a guarantee in reflected wavefront error or transmitted wavefront error, please contact our Sales Division with your requests.
Remark -
Attention
  • The beam deviation at transmission of a wedged beamsplitter is large compared to a one made of optical parallel.
  • The amount of beam deviation of a beamsplitter depends on the thickness of the substrate, the wavelength or the angle of incidence of the input beam.
  • Transmission curves are based on actual measurements and may vary with manufacturing lots.
  • Surface flatness is the reflected wavefront distortion of the surface prior to coating.
  • Be sure to wear laser safety goggles when checking optical path and adjusting optical axis.
Design wavelength 400 - 700nm
Image Label Chromium Plate Half Mirror 100mm Diameter 400 - 700nm
Diameter φD 100mm
Material BK7
Surface flatness λ/10
Coating Front surface ; Chromium
Rear surfaces ; Multilayer antireflection coating
Incident angle 45°
Transmittance <br> (Average P and S) 30±5% (average with respect to wavelength.)
Divergence ratio <br> (reflectance : transmittance) 1 : 1
Laser Damage Threshold 0.25J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz)
Surface Quality <br> (Scratch-Dig) 40-20
Wavelength range 400 - 700nm
Diameter φD φ100mm
Thickness t 10mm
Parallelism <5″
In stock
SKU
PSCH-100C10-10-550
$759.00

Delivery in : 2 weeks

Chromium plate half mirrors are plate beamsplitters that are coated with chromium (Cr) on the front surface of optical parallels or wedged substrates. The other surface is coated with multi-layer anti-reflection.

Resources & Downloads

Click here to receive announcements and exclusive promotions

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.