25.4-mm mirror mount, stainless steel, high-stability, rear-loading, 3 hex adjusters

SKU : MHX-25.4F-R

In stock
SKU
MHX-25.4F-R
$119.00

Delivery in : in stock

MHX-25.4F-R mirror mount is an all-stainless steel positioner made for standard 25.4-mm (1-in.) mirrors. Alignment is done with three 250-µm thread pitch (just over 100 TPI) hex-key screws. Mirrors are rear-loaded and held with a torsion-barrier, set screw clamp. The MHX mount has additional features like center-post mounting, adhesive wells, and keying pin slots. Its key feature is a hollow-frame design which not only provides higher moment of inertia to maximize stiffness but also thinner, reduced-mass sections allowing it to reach thermal equilibrium faster than traditionally designed mounts. Thermal repeatability tests validate the effectiveness of the new frame design, showing lower deflection and equivalent repeatability against rival mounts.
MHX-25.4F-R mirror mount is an all-stainless steel positioner made for standard 25.4-mm (1-in.) mirrors. Alignment is done with three 250-µm thread pitch (just over 100 TPI) hex-key screws. Mirrors are rear-loaded and held with a torsion-barrier, set screw clamp. The MHX mount has additional features like center-post mounting, adhesive wells, and keying pin slots. Its key feature is a hollow-frame design which not only provides higher moment of inertia to maximize stiffness but also thinner, reduced-mass sections allowing it to reach thermal equilibrium faster than traditionally designed mounts. Thermal repeatability tests validate the effectiveness of the new frame design, showing lower deflection and equivalent repeatability against rival mounts.
More Information
Name 25.4-mm mirror mount, stainless steel, high-stability, rear-loading, 3 hex adjusters
Weight 0.1700kgs
Attention Knobs and locks sold separately
Angle Range ±3°
Diameter 25.4mm
Material Stainless Steel
Number of Control Axes 3 points
Optics diameter ?B φ25.4mm
Mount Material Stainless Steel
Compatible Optics Diameter φ25, φ25.4mm
Compatible Optics Thickness 3 - 6mm
Mirror Loading Rear
Mirror Clamping Mechanism Set Screw with Torsion Barrier, 2-mm (5/64-in.) Hex Key
Number of Adjustment Axes 3 points
Angular Travel Range ±3°
Linear Travel Range ±3.5mm
Adjuster Thread M6 x 0.250mm
Standardized Adjustment Sensitivity (based on 1° knob rotation) 20 μrad
Typical Adjustment Sensitivity 6±2 μrad
Dowel Pin Keys ɸ2mm Slot and Hole
Standard Mounting Counterbored clearance hole for M4 / 8-32 screws
Center-Post Mounting M4 and 8-32 threaded holes
Thermal Repeatability with a Δ10°C Thermal Cycle ≤1.5 μrad

Download Product's Documents :

We found other products you might like!