Cage 45-Degree Mirror Mount
C16-AMH-12.7UU
A triangular mirror holder that can bend the rod and optical axis to 90 degrees. It can precisely adjust the angle of the mirror.
◦ Four dedicated rods are used in the cage system to attach various kinds of components along the optical axis.
There are three types of cage system available. Two types uses dedicated rod of dia. 6mm. One of them is P30 mm corner arrangement (C30 series) and another one is P60 mm corner arrangement (C60 series).
In addition, the one uses a dedicated rod of dia. 4mm is available for P16 mm corner arrangement to miniaturize.
◦ Mirror holders are supported by four (or three) rods (cages). In addition, the mirror holder can split the optical axis and the cage into two, or fold it to 90 degrees.
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system.
There are three types of cage system available. Two types uses dedicated rod of dia. 6mm. One of them is P30 mm corner arrangement (C30 series) and another one is P60 mm corner arrangement (C60 series).
In addition, the one uses a dedicated rod of dia. 4mm is available for P16 mm corner arrangement to miniaturize.
◦ Mirror holders are supported by four (or three) rods (cages). In addition, the mirror holder can split the optical axis and the cage into two, or fold it to 90 degrees.
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system.
| Name | Cage 45-Degree Mirror Mount |
|---|---|
| Weight | 0.0400lbs |
| Guide |
▶Please contact our Sales for methods to fix the cage system to other equipment and parts not included in the WEB catalog. ▶For consultation of optical system using cage system please contact Sales. |
| Attention |
▶If the rod is tightened too tightly or if the tightening force is greatly different depending on the location, the rod may not fit in other holders. ▶Initially fix the rod lightly, after building the optical system, please tighten so that the force that fixes the rod is even in each holder. ▶When configuring a large optical system or a long optical system, it may become distorted or become unstable due to vibration. |
| Primary material | Aluminum |
| Guide Rod Diameter (Spaceing between rod) | φ4mm (16x16mm) |
| Compatible Optics Diameter | φ12.7mm |
| Compatible Optics Thickness | 3 - 5mm |
| Clear Aperture | φ11.5mm |
| Incident angle | 45° |
| Adjustment Range /Tilt | ±3° |
| Adjustment Range /Rotation | ±3° |
| Resolution /Tilt | 0.75°/rotation |
| Resolution /Rotation | 0.75°/rotation |
Out of stock
SKU
C16-AMH-12.7UU
Customize product
A triangular mirror holder that can bend the rod and optical axis to 90 degrees. It can precisely adjust the angle of the mirror.
