40W Broadband Thermal Sensor, 50 mJ - 60 J, 25-mm Sensor Aperture, used with PC thru USB Connection
PM40-25D-HP-USB
The Opto Sigma PM40-25D-HP-USB is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 40W with 1mW resolution. The PM40-25D-HP-USB operates with a simple connection to a USB port on a standard PC. No additional power supplies or controllers are required. Software to run the sensor is available as a free download. Click download button below.
-
Name | 40W Broadband Thermal Sensor, 50 mJ - 60 J, 25-mm Sensor Aperture, used with PC thru USB Connection |
---|---|
Weight | 0.9000lbs |
Guide | - |
Attention | - |
Energy Range | 100 mJ - 60 J |
Power Range | 20 mW - 40 W |
Wavelength Range | 0.19 - 11µm |
Aperture | 25mm |
Cooling | Convection |
Max Intermittent Power | 60W |
Power Resolution | 1mW |
Noise Equivalent Power (NEP) | 1mW |
Response Time (0-90%) | 1.8s |
Power Calibration Uncertainty | +/-3% |
Power Linearity | +/-1% |
Energy Resolution | 1mJ |
Energy Calibration Uncertainty | +/-5% |
Type of Absorber | HPB |
Maximum Power Density | 9kW/cm2 |
Max Energy Density | 5ms pulse width: 36 J/cm2, 10us pulse width: 1.2 J/cm2, 10ns pulse width: 0.3 J/cm2 |
Interface | USB |
Out of stock
SKU
PM40-25D-HP-USB
The Opto Sigma PM40-25D-HP-USB is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 40W with 1mW resolution. The PM40-25D-HP-USB operates with a simple connection to a USB port on a standard PC. No additional power supplies or controllers are required. Software to run the sensor is available as a free download. Click download button below.