30W Broadband Thermal Sensor, 50 mJ - 45 J, 25-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
PM25-25D-HP
The Opto Sigma PM25-25D-HP is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 30W with 1mW resolution. The PM25-25D-HP has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
-
| Name | 30W Broadband Thermal Sensor, 50 mJ - 45 J, 25-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller |
|---|---|
| Weight | 0.5000lbs |
| Guide | - |
| Attention | - |
| Energy Range | 50 mJ - 45 J |
| Power Range | 20 mW - 30 W |
| Wavelength Range | 0.19 - 11µm |
| Aperture | 25mm |
| Cooling | Convection |
| Max Intermittent Power | 45W |
| Power Resolution | 1mW |
| Noise Equivalent Power (NEP) | 1mW |
| Response Time (0-90%) | 1.5s |
| Power Calibration Uncertainty | +/-3% |
| Power Linearity | +/-1% |
| Energy Resolution | 1mJ |
| Energy Calibration Uncertainty | +/-5% |
| Type of Absorber | HPB |
| Maximum Power Density | 18kW/cm2 |
| Max Energy Density | 5ms pulse width: 36 J/cm2, 10us pulse width: 1.2 J/cm2, 10ns pulse width: 0.3 J/cm2 |
| Interface | DB15 Conector, Compatible with PEM-TS-4.3 Controller |
In stock
SKU
PM25-25D-HP
Customize product
The Opto Sigma PM25-25D-HP is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 30W with 1mW resolution. The PM25-25D-HP has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
Resources & Downloads
Related Products
Check items to add to the cart or
