自動直動ステージ用コントローラ
Selection Guide for Stepper Motor Controllers
|
Groups |
Description |
Control Axis Options |
Computer Interface Options |
Micro Stepping |
Min. / Max. Driving Speed |
Additional Features |
Relative Price |
|
Standard Stepper Controllers |
The GSC series controllers provide cost-effective, basic control for the 5-phase stepper motor stages and actuators.
|
RS232C
|
1 and 2 pulses/step The 2-axis version (GSC-02) only runs in half-step mode. |
100 Pulses/Sec 20,000 Pulses/Sec
|
Limit switch detection, Requires AC-ADP-2427 power supply |
$ |
|
|
Preset Position Controller |
The GIP-101B is designed to control the SIZM and SZLM motorized zoom microscopes and objective turrets but can also be used for most stepper motor stages also. |
|
USB |
1, 2, 4, 5, 8, 10, 20, 25, 40, 50, 80, 100, 125, 200, and 250 pulses/step
|
1 Pulse/Sec 500,000 Pulses/Sec
|
5-point preset position function |
$$$ |
|
Micro Stepping Controller |
The SHOT-702 series controller includes a micro-step driver to enable ultra-fine resolution for the stepper motor stages and actuators. |
|
RS232C, USB |
1, 2, 4, 5, 8, 10, 20, 25, 40, 50, 80, 100, 125, 200, and 250 pulses/step |
1 Pulse/Sec 500,000 Pulses/Sec
|
Limit switch detection, E-Break for Motor |
$$$ |
|
Low Noise Controller |
The HSC 3-axis controller is designed to provide low noise and high current capacity for driving larger stepper motor stages. The driving speed is 8X higher than the other controllers |
|
USB |
40 pulses/step, only |
1 Pulse/Sec 4,000,000 Pulses/Sec
|
Low noise and vibration driver design, High driving current capacity, 3-axis Linear Interpolation, Circular Interpolation |
$$$$$$ |
|
Closed-Loop Controller |
The SHOT-GS controllers provide full closed-loop functionality for 2- or 4- axis stage systems. |
|
GPIB, RS232C, USB |
1, 2, 4, 5, 8, 10, 20, 25, 40, 50, 80, 100, 125, 200, and 250 pulses/step |
1 Pulse/Sec 500,000 Pulses/Sec
|
Closed-loop Control, Control programs can be stored in internal memory, Linear Interpolation (2 axes), Circular Interpolation, Requires CJ-200A control pad |
$$$$$$$ |
|
Closed Loop, Extendable Controller |
The HIT controllers can be daisy-chained together to control 8 stages. They run in a master/slave configuration and provide full closed-loop functionality |
|
RS232C, USB, Ethernet |
1, 2, 4, 5, 8, 10, 20, 25, 40, 50, 80, 100, 125, 200, and 250 pulses/step |
1 Pulse/Sec 500,000 Pulses/Sec
|
Can be daisy-chained to control up to 8 axes, Closed-loop control function, Requires the AC-ADP-2427 power supply for each unit. |
2-Axes: $$$, Additional Axis: $
|
