40mm Kinematic Flip Bases, M4 Thread, M6 Base
FMB-40
×
FMB Kinematic Flip Bases can be flipped just over 90 degrees to allow a mirror mount to be removed from a beam path. Because FMBs have a kinematic mechanism, they can be flipped back into position without losing alignment (within a few arc seconds). They are designed to be mounted to PED-series pedestal posts or standard RO-series 12.7mm posts.
◦FMBs can be used in combination with a pedestal or standard post and mirror mount .
◦These flip mounts have better than 5 arc-second repeatability.
◦These flip mounts have better than 5 arc-second repeatability.
| Nom | 40mm Kinematic Flip Bases, M4 Thread, M6 Base |
|---|---|
| Poids | 0.1000kgs |
| Guide | Please use the handle to move the flip base rather than touching the mount (e.g. mirror mount) on top of the base. |
| Remark | ◦For best repeatability, slowly rotate the base on and off the kinematic points during the flip process. |
| Attention | ◦To ensure laser safety, please configure the flip base to move the mirror so the reflection points downwards rather than upwards. |
| Capacité de charge | 49N (5.0kg) |
| Mounting Thread | M4 |
| Aproximate Flip Angle | 90 deg. |
| Height | 20mm |
| Flip Repeatability | 5″ (25μ rad) |
| Base Mounting | M6 set screw, or counterbored clearance hole for 8-32 or M4 caphead screw |
| Load Capacity | 5.0kgf (11.0 lb) |
En stock
SKU
FMB-40
117,40 €
Customize product
FMB Kinematic Flip Bases can be flipped just over 90 degrees to allow a mirror mount to be removed from a beam path. Because FMBs have a kinematic mechanism, they can be flipped back into position without losing alignment (within a few arc seconds). They are designed to be mounted to PED-series pedestal posts or standard RO-series 12.7mm posts.
Resources & Downloads
Produits apparentés
-
-
-
Rétroviseurs en aluminium (cercle)À partir de 19,40 €
