30-mm mirror mount, stainless steel high stability, front loading, 2 piezomotor actuators
MHX-30A-PDM
The Piezo Drive Motors are mounted on a High-stability Mirror Mount, which characteristics of maximize stiffness and faster to reach thermal equilibrium are achieved by a hollow-frame design.
Operated by a Piezo Drive Motor, it can be remotely controlled and adjusted with high resolution. It eliminates the need to reach into the optical path, prevents unintentional interruption of the optical path, and ensures stability and safety of the optical system.
Ideal for applications such as interferometry and precise measurement.
Please check for an introduction video of the structure and features of MHX.
The mirror is held in place at three points on the sides, including a leaf spring retention mechanism whose force can be adjusted with set screws.
Adhesive holes for mirror adhesion and pin holes for anti-rotation and positioning are equipped.
High-density stainless steel is used for the material, but the weight has been reduced by reducing the thickness.
The frame design provides a higher moment of inertia to maximize stiffness and reduced-mass sections allowing it to reach thermal equilibrium faster for maximum stability.
The Piezo Drive Motor mounted on this product is a dedicated Piezo Drive Motor to enable high-resolution adjustment.
| Nom | 30-mm mirror mount, stainless steel high stability, front loading, 2 piezomotor actuators |
|---|---|
| Poids | 0.2700kgs |
| Guide | The recommended tightening torque for the set screw of the leaf spring retention mechanism is 3 to 5 N·cm. For operation, use the dedicated Piezo Drive Controller (PDM-ID-02). One controller is required for each product. This product comes with two connection cables (2m) dedicated to the Piezo Drive Controller. |
| Attention |
|
| Optic Loading Side | Front Loading |
| Angle Range | ±3° |
| Material | Stainless Steel |
| Number of Control Axes | 2 points |
| Optic Diameter | φ30mm |
| Mount Material | Stainless Steel |
| Compatible Optics Diameter | 30mm |
| Compatible Optics Thickness | 3 - 6mm |
| Mirror Loading | Front |
| Mirror Clamping Mechanism | Set Screw with Torsion Barrier, 2-mm (5/64-in.) Hex Key |
| Recommended Mirror Clamping Torque | 0.07+/-0.01 Nm (10+/-2 oz.-in.) |
| Number of Adjustment Axes | 2 points |
| Angular Travel Range | +/-3Deg. |
| Adjuster Thread | M6 x 0.250mm |
| Standardized Adjustment Sensitivity (based on MIM of piezomotor actuator) | 0.8 urad |
| Dowel Pin Keys | ɸ2mm Slot and Hole |
| Standard Mounting | Counterbored clearance hole for M4 / 8-32 screws |
| Center-Post Mounting | M4 and 8-32 threaded holes |
| Thermal Repeatability with a 10C Thermal Cycle | 1.5 urad |
En stock
SKU
MHX-30A-PDM
1 438,62 €
Customize product
The Piezo Drive Motors are mounted on a High-stability Mirror Mount, which characteristics of maximize stiffness and faster to reach thermal equilibrium are achieved by a hollow-frame design.
Operated by a Piezo Drive Motor, it can be remotely controlled and adjusted with high resolution. It eliminates the need to reach into the optical path, prevents unintentional interruption of the optical path, and ensures stability and safety of the optical system.
Ideal for applications such as interferometry and precise measurement.
Please check for an introduction video of the structure and features of MHX.
Produits apparentés
Cochez les articles à ajouter au panier ou
